| Hardware Setup |
2.4.3 <CPU Cooler Installation>
The board accessories come with one CPU cooler, the cooler’s specification is listed below,
please check the installation steps before you start.
Notice: Installing the cooler improperly may cause the system unstable, if you face system rebooting or other issue, please check this point.
Cooler Specification:
Rated Voltage | Consumption | Sound Level | Rated Speed | Air Flow |
12V | Max 0.12Amp | Max 27dB | 5000rpm | Max 4.73CFM |
The Cooler can compete with up to 2.0GHz of Intel Pentium M processor, if user needs to
use more upper frequency, please replace other coolers.
Cooler Installation Guide:
1. Remove the sticker on the base
2.Put the base through the fixing holes
3.Put the cooler through the four pills on the base
4. Press the plate and move | 4. Connect the fan connector on CPUFAN |
forward |
|
20 | CPU Cooler Installation |