BIOS SETUP
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
|
|
|
|
|
| PNP OS Install | No | ITEM HELP |
|
| Reset Configuration Data | Disabled | Menu Level |
|
| Resources Controlled By | Auto (ESCD) | Default is Disabled. |
|
| Select Enabled to reset |
| ||
| IRQ Resources | Press Enter |
| |
| Extended System |
| ||
| DMA Resources | Press Enter |
| |
| Configuration Data |
| ||
|
|
| (ESCD) when you exit |
|
| PCI/VGA Palette Snoop | Disabled | Setup if you have |
|
| INT Pin 1 Assignment | Auto | installed a new |
|
| and the system |
| ||
| INT Pin 2 Assignment | Auto |
| |
| reconfiguration has |
| ||
| INT Pin 3 Assignment | Auto | caused such a serious |
|
| INT Pin 4 Assignment | Auto | conflict that the OS |
|
| INT Pin 5 Assignment | Auto | cannot boot |
|
| INT Pin 6 Assignment | Auto |
|
|
| INT Pin 7 Assignment | Auto |
|
|
| INT Pin 8 Assignment | Auto |
|
|
|
|
|
|
|
|
|
|
|
|
PNP OS Install
Enable the PNP OS Install option if it is supported by the operating system installed. The default value is No.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices automatically with the use of a use a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some
IB865 User’s Manual | 49 |