BIOS SETUP
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.
Power Management
This field allows you to select the type of power saving management modes. There are four selections for Power Management.
Min. Power Saving | Minimum power management |
Max. Power Saving | Maximum power management. |
User Define | Each of the ranges is from 1 min. to 1hr. |
| Except for HDD Power Down which |
| ranges from 1 min. to 15 min. |
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank | Default setting, blank the screen and turn off |
| vertical and horizontal scanning. |
DPMS | Allows BIOS to control the video display. |
Blank Screen | Writes blanks to the video buffer. |
Video Off In Suspend
When enabled, the video is off in suspend mode.
Suspend Type
The default setting for the Suspend Type field is Stop Grant.
Modem Use IRQ
This field sets the IRQ used by the Modem. By default, the setting is 3.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.
IB868 User’s Manual | 37 |