2 Make sure the TV base is centered on it and not hanging over any of its edges.
Tip
•• If the TV base is too large to put on top of the SoundStage, place the SoundStage in another location such as on an open shelf under the TV, but keep it close to your TV so the audio cable will reach.You can also mount your TV on the wall above the SoundStage.
•• If your TV comes with an
•• If placing the SoundStage in a cabinet or on a shelf, for optimum audio performance, make sure the font of the SoundStage as close as possible to the front edge of the shelf.
•• If placing the SoundStage backed up to a wall, make sure there is at least a distance of 1 inch between the wall and the rear of the SoundStage.
4Connect and set up
This section helps you connect your SoundStage to a TV and other devices, and then set it up.
For information about the basic connections of your SoundStage and accessories, see the Quick start guide.
Note
•• For identification and supply ratings, see the type plate at the back or bottom of the product.
•• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Connect to TV
Connect your SoundStage to a TV to watch videos.You can listen to the TV audio through your SoundStage.
Use the best quality connection available on your SoundStage and TV.
Connect to TV through HDMI (ARC)
Best quality audio
Your SoundStage supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your SoundStage by using a single HDMI cable.
TV |
EN 7