Product Safety Information, Safety Precautions

Agency Approvals

4.5Product Safety Information

4.5.1Safety Precautions

Review the following precautions to avoid injury and prevent damage to this product, or any products to which it is connected. To avoid potential hazards, use the product only as specified.

Read all safety information provided in the component product user manuals and understand the precautions associated with safety symbols, written warnings, and cautions before accessing parts or locations within the unit. Save this document for future reference.

Caution: To Avoid Electric Overload: To avoid electrical hazards (heat shock and/or fire hazard), do not make connections to terminals outside the range specified for that terminal. See the product user manual for correct connections.

Caution: To Avoid the Risk of Electric Shock: When supplying power to the system, always make connections to a grounded main. Always use a power cable with a grounded plug (third grounding pin). Do not operate in wet, damp, or condensing conditions.

Caution: System Airflow Requirements: Platform components such as processor boards, Ethernet switches, etc., are designed to operate with external airflow. Components can be destroyed if they are operated without external airflow. Chassis fans normally provide external airflow when components are installed in compatible chassis. Filler panels must be installed over unused chassis slots so that airflow requirements are met. Please refer to the product data sheet for airflow requirements if you are installing components in custom chassis.

Caution: Microprocessor Heatsinks May Become Hot During Normal Operation: To avoid burns, do not allow anything to touch processor heatsinks.

Caution: Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not operate this product with any removed enclosure covers or panels.

Caution: To Avoid the Risk of Electric Shock: Do not operate in wet, damp, or condensing conditions.

Caution: Do Not Operate in an Explosive Atmosphere: To avoid injury, fire hazard, or explosion, do not operate this product in an explosive atmosphere.

Caution: If Your System Has Multiple Power Supply Sources: Disconnect all external power connections before servicing.

Warning: Power Supplies Must Be Replaced by Qualified Service Personnel Only.

Caution: Lithium Batteries Are Not Field-Replaceable Units: There is a danger of explosion if a battery is incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the battery in fire. When the battery is replaced, the same type or an equivalent type recommended by the manufacturer must be used. Used batteries must be disposed of according to the manufacturer's instructions. Return the unit to Intel for battery service.

28	Intel® NetStructure™ MPRTM4808 Rear Transition Board Installation Guide

MPRTM4808 specifications

The Intel MPRTM4808 is a cutting-edge microprocessor that signifies a leap forward in computing technology, designed to meet the demands of various sectors, from data centers to personal computing. Released as part of Intel's latest lineup, the MPRTM4808 showcases a suite of advanced features, exceptional performance characteristics, and innovative technologies that cater to today's computing landscape.

One of the standout features of the MPRTM4808 is its impressive core architecture. With multiple high-performance cores, the processor is engineered to handle parallel processing tasks efficiently. This design facilitates seamless multitasking, allowing users to run multiple applications simultaneously without significant performance degradation. Each core utilizes hyper-threading technology, which enables two threads to be executed per core, further enhancing the processor's efficiency and responsiveness.

The MPRTM4808 is built on Intel’s latest 10nm SuperFin process technology, which provides improved power efficiency and better overall performance compared to previous generations. This smaller process node translates to higher transistor density, resulting in improved performance per watt. Consequently, users experience lower energy consumption while maintaining high computation speeds.

Additionally, Intel’s Smart Cache technology is integrated into the MPRTM4808. This feature allows cores to share a dynamic cache, optimizing memory bandwidth and latency. The result is faster data access times and improved overall system performance, especially during memory-intensive tasks.

The MPRTM4808 incorporates Intel's latest integrated graphics technology, facilitating smooth rendering of graphics for both multimedia purposes and professional applications. This integration means users can enjoy sophisticated graphics without the need for a separate graphics processing unit, reducing complexity and costs.

Security is paramount in today’s technology landscape, and Intel has embedded its latest security features within the MPRTM4808. Technologies such as Intel Software Guard Extensions (SGX) provide hardware-based security, enabling safe execution of critical applications and protecting sensitive data from unauthorized access.

Finally, the MPRTM4808 supports modern connectivity standards, including Thunderbolt 4 and USB 4, which offer high-speed data transfer and versatile connectivity options for a variety of peripherals. This ensures that users can take full advantage of the device's capabilities while connecting to a wide array of modern accessories.

In sum, the Intel MPRTM4808 microprocessor embodies a sophisticated blend of performance, efficiency, and security, making it an ideal choice for a diverse range of computing applications in today's fast-paced tech environment.