Chapter 4 Award BIOS Setup
SUPER IO DEVICE:
The options for these items are found in its sub menu. By pressing the <ENTER> key, you are prompt to enter the sub menu of the detailed options as shown below:
Phoenix – Award CMOS Setup Utility
SuperIO Device
Onboard Serial Port 1 | [3F8/IRQ4] | Item Help | |
Onboard Serial Port 2 | [2F8/IRQ3] | ||
| |||
UART Mode Select | [Normal] |
| |
TxD, RxD Polarity Active | [Lo, Hi] | Menu Level ► | |
|
| ||
|
|
|
↑↓→←:Move Enter: Select | ||
F5: Previous Values | F7:Optimized Defaults | |
Descriptions on each item above are as follows:
1.Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and second serial ports.
2.UART Mode Select
This item allows you to select UART mode.
3.TxD, RxD Polarity Active
This item allows you to determine the active of RxD, TxD
ONBOARD SERIAL PORT 3:
ONBOARD SERIAL PORT 4:
Select a logical COM port name and matching address for the third and forth serial ports. Select an address and corresponding interrupt for third and forth serial port.
WATCHDOG SUPPORT:
To select
Page: |