Intel XP-P4S8X-VM user manual Hardware Installation, Surcen Surround Center Connector

Page 9

BATTERY

The improper removal of the battery can result in harm. When replacing a battery, please make sure you use one that is of similar brand and model number.

For information related to battery specifications and precautions, please refer to the manufacturer instructions.

If you wish to delete the data stored in the CMOS, please follow the steps below:

1.Please turn off your computer and unplug the power.

2.Remove the battery from the motherboard.

3.Wait 10 minutes and then replace the battery onto the motherboard.

4.Plug in the power supply and turn on your system.

SUR_CEN (Surround Center Connector)

Connects to the optional surround center cable.

 

 

PIN

SIGNAL

2

6

1

SUR OUTL

1

5

2

SUR OUTR

3GND

4No Pin

5CENTER_OUT

6LEF_OUT

2.Hardware Installation

1.Please make sure that the CPU used is supported by your motherboard.

2.Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.

3.Please make sure that an even layer of heat sink paste is added between the CPU and the fan sink.

4.Please do not turn on the power prior to installing the fan sink. Doing so can result in overheating and lead to permanent damage to the CPU.

5.Please follow the CPU specifications when setting the frequency. It is not recommended that system speed settings exceed that of hardware specifications. If you wish to set your system speed to exceed the recommended specifications, please check your hardware specifications eg: CPU, graphics card, memory, hard drive

The following must be supported to allow the use of Hyper-Threading Technology:

-an Intel Pentium 4 CPU with HT

-a motherboard supporting HT

-HT selection feature within BIOS

-an operating system supporting HT

English

9

Image 9
Contents XP-P4S8X-VM Terms of Use Copyright Declaration Legal DisclaimerContents XP-P4S8X-VM Motherboard LayoutProduct Introduction Feature SummaryI/O Back Panel and Connectors & Jumper Setting FDD Floppy Disk Drive ConnectorIDE1 / IDE2 IDE1 and IDE2 Connector ATX12V +12V Power Connector ATX ATX Power ConnectorFpanel Front Panel Control Connector Cdin Optical Drive Audio Connector Faudio Front Audio ConnectorFUSB1 Front USB Connector Clrcmos Clear CmosSurcen Surround Center Connector Hardware InstallationInstallation of a Pentium 4 CPU and Fan Sink Installation of the Graphics Card Installation of MemoryEnglish Setup Screen Features Bios version E3 Bios SetupStandard Cmos Features Date mmddyyTime hhmmss Floppy 3 Mode Support Halt onMemory Advanced Bios Features Integrated Peripherals Power Management Setup Power On by Mouse Resume by Alarm Power On by KeyboardPower LED in S1 state System After AC BackPCI 1 IRQ Assignment PnP/PCI ConfigurationPCI 2 IRQ Assignment PCI 3 IRQ AssignmentPC Health Status MB Intelligent TweakerM.I.T Load Optimized Defaults Load Fail-Safe DefaultsSet User Password Save & Exit SetupExit Without Saving Driver Installation

XP-P4S8X-VM specifications

The Intel XP-P4S8X-VM is a versatile and robust motherboard designed to cater to the needs of both enthusiasts and everyday users alike. Built upon the Socket 478 platform, it is primarily aimed at supporting Intel Pentium 4 processors, which were renowned for their performance and computing capabilities in the early 2000s. This motherboard provides an exceptional foundation for building a powerful and reliable desktop computer.

One of the key features of the XP-P4S8X-VM is its support for dual-channel DDR SDRAM, which significantly enhances memory bandwidth and system performance. The motherboard supports up to 2 GB of memory, providing ample capacity for multitasking and demanding applications. This capability proves essential for gamers and professionals who require smooth and efficient operation.

In terms of expansion, the XP-P4S8X-VM offers a range of slots for additional peripherals. It includes multiple PCI slots, allowing users to add sound cards, network cards, or additional graphics cards, making it a suitable choice for those looking to upgrade their system over time. The AGP slot specifically caters to older graphics cards, which were popular during the era of the Pentium 4.

The motherboard also integrates several important technologies, including support for USB 2.0 and Integrated Audio. USB 2.0 enables faster data transfer rates, allowing users to connect various devices such as printers, external hard drives, and cameras with ease. The integrated audio delivers decent sound quality for the average user, making it unnecessary to purchase a separate sound card for basic multimedia needs.

Moreover, the XP-P4S8X-VM features a reliable chipset that helps stabilize performance, along with an onboard LAN capability for easy network connectivity. The inclusion of a variety of I/O ports, such as PS/2 for keyboards and mice, as well as serial and parallel ports, allows for comprehensive connectivity to legacy devices.

With its robust design, abundant features, and support for essential technologies, the Intel XP-P4S8X-VM motherboard stands out as a solid choice for users seeking a reliable platform for their computing needs. Whether for gaming, work, or general use, it offers a blend of performance and flexibility that can suit a wide range of applications. Even today, its build quality and specifications can be appreciated by those working with older hardware or looking to revive vintage computing setups. Overall, it represents a valuable component in the evolution of desktop computing.