Intel SE75xx, SE7320, SE72xx, SE8500 LAN Channel Screens, LAN Configuration, Screen 1 Configure IP

Page 14

User’s Guide for Server Configuration Wizard (SCW) Utility

LAN Channel Screens

LAN Channels 1 and 3 use similar configuration screens, which will be illustrated here only once. Items that apply only for the GCM NIC (default is Channel 3) will not appear or will be grayed out when the standard NIC is chosen. Advanced Features configuration is separate from GCM NIC Channel configuration.

LAN Configuration, Screen 1 – Configure IP

Steps to complete Screen 1:

1.Choose Static IP or DHCP setup.

The GCM NIC should have a static IP.

If DHCP is chosen, all other entries will be filled in automatically.

If Static is chosen, the option to Continue will not be available until all required entries are completed. .

2.(Only required if Static is chosen.) Enter the server’s IP address and subnet mask and gateway.

If less than three digits are required for a subsection of the address, either use the mouse or the tab key to move to the next subsection.

3.(Only required if DHCP does not preset the gateway.) Either enter the MAC address of the Gateway or click Resolve Gateway MAC Address (described in the next section).

The Backup Gateway IP address is optional

Figure 10. LAN Screen 1 – IP Configuration

14

Image 14
Contents User’s Guide For Server Configuration Wizard SCW Utility Page Contents Figures User’s Guide Layout Overview of Server Configuration WizardTechnical Details Installation Paths Quick Links for Experienced Users of SCWFeature Description General Wizard Format and SyntaxServer Probing Booting the ServerGetting Started Start Screen Initial OptionsUnattended Configuration and Cloning/Restore Option Silent InstallSelecting Options to Configure Main Configure FRU/SDRsBios Date and Time Setting a System Asset TagChannel Configuration LANs and Serial/Modem Channels to ConfigureLAN Configuration, Screen 1 Configure IP LAN Channel ScreensResolve Gateway MAC Address LAN Channel, Screen 2 Configure Out of Band OOB Access Access LevelsLAN Channel, Screen 3 Alerts LAN Screen 3 AlertsLAN Alert Filters LAN Alert FiltersConfiguring the Serial/Modem Channel Serial/Modem Screen 1 Modem SetupPrivilege Level see Access Level under Figure Serial/Modem Screen 2 Remote Server ManagementSerial/Modem Screen 3 Alerting Serial 3 AlertsSerial Alert Filters Serial Alert FiltersConfiguring Users Selection Screen User SelectionSettings Available per User User NameConfiguring the Advanced Features Advanced Screen 1 SNMP, KVM and Telnet ConfigurationAdvanced Features Screen 2 Web Configuration Advanced Features Screen 3 Smtp Alert SettingsSet and Save the Configuration Server Configuration UtilitiesLoading a Configuration from a Diskette Creating DiskettesAppendix A. Acronyms and Glossary Term DefinitionTo format a removable media device as FAT To enable USB devices in the Bios for DOS accessAppendix B. Removable Media Considerations