Intel D915GUX, D915GAG, D915GEV manual Clearing Trusted Platform Module Ownership, Software Support

Page 69

Trusted Platform Module

Clearing Trusted Platform Module Ownership

WARNING

Disconnect the desktop board's power supply from its AC power source before you connect or disconnect cables, or install or remove any board components. Failure to do this can result in personal injury or equipment damage. Some circuitry on the desktop board can continue to operate even though the front panel power switch is off.

CAUTION

DATA ENCRYPTED BY ANY PROGRAM UTILIZING THE TPM WILL BECOME INACCESSIBLE IF TPM OWNERSHIP IS CLEARED. Recovery procedures may allow the migratable keys to be recovered and might restore access to encrypted data. (Review the Recovery Procedures for detailed instructions).

The TPM may be cleared to transfer ownership of the platform to a new owner.

1.Observe precautions in the above WARNING then open the system case.

2.Move the configuration jumper on the board to pins 2-3.

3.Restore power to the PC and power on.

4.System should automatically enter BIOS setup.

5.Use the arrow keys to select Clear Trusted Platform Module, press <Enter>.

6.If you agree to the warning message select Ok and press <Enter>.

7.Press the <F10> key to save and exit, select Ok and press <Enter>.

8.Power off the system.

9.Review precautions in the WARNING above.

10.Restore the configuration jumper on the board to pins 1-2.

When cleared, the TPM module is disabled by default.

Software Support

For assistance with the Infineon Security Platform Software, visit the web at: http://www.infineon.com

For assistance with the Wave System EMBASSY Trust Suite, visit the web at: http://www.wave.com/support/ets.html

For additional information about TPM and enhancing PC security, visit: https://www.trustedcomputinggroup.org/home

69

Image 69
Contents Product Guide Intel Desktop Board D915GEV/D915GUXRevision Revision History Date Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementIntended Audience PrefaceInformation Layout ConventionsTerminology Box ContentsContents Bios Regulatory Compliance ContentsTables Feature Summary Desktop Board FeaturesSecurity Optional Peripheral InterfacesManufacturing Options Desktop Board FeaturesSupported Operating Systems Manufacturing OptionsDesktop Boards D915GAV and D915GEV Components Desktop Board ComponentsLabel Description Intel Desktop Boards D915GUX and D915GAG Components Desktop Boards D915GAG and D915GUX Components D915GAV/D915GAGProcessor Main Memory Desktop Board D915GAV/D915GAG Memory ConfigurationsIntel 915G Express Chipset Desktop Board D915GEV/D915GUX Memory ConfigurationsAudio Subsystem Graphics SubsystemInput/Output I/O Controller RJ-45 LAN Connector LEDsLAN Subsystem Optional LAN Subsystem SoftwareRJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs RJ-45 10/100 Ethernet LAN Connector LEDsHi-Speed USB 2.0 Support LED Color LED State IndicatesEnhanced IDE Interface Serial ATA and IDE Auto ConfigurationSerial ATA ExpandabilityPCI and PCI Express Auto Configuration Power Management FeaturesSecurity Passwords Chassis IntrusionFan Connectors Power ConnectorsFan Speed Control Intel Precision Cooling Technology Suspend to RAM Instantly Available PC TechnologyResume on Ring Location of Standby Power IndicatorBattery SpeakerReal-Time Clock Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Installation InstructionsEnsure Electromagnetic Compatibility EMC Compliance Place Battery Marking Prevent Power Supply OverloadInstalling and Replacing Desktop Board Components Chassis and Component CertificationsUse Only for Intended Applications Installing the I/O ShieldRefer to Appendix B for regulatory requirements Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorRemove the Protective Socket Cover Install Processor Installing the Processor Fan Heat SinkRemoving the Processor Connecting the Processor Fan Heat Sink CableGuidelines for Dual Channel Memory Configuration Installing and Removing Memory256 MB, 400 MHz 512 MB, 400 MHzMatching the Correct Dimm Installing DIMMsInstalling a Dimm Removing DIMMs Installing and Removing a PCI Express x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Connecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Cable Connecting the Serial ATA Sata CableInternal Headers Connecting Internal HeadersInstalling a Front Panel Audio Solution Front Panel Audio Header Signal NamesPin Signal Name Connecting the Front Panel Header Connecting USB 2.0 HeadersUSB 2.0 Header Signal Names Front Panel Header Signal NamesItem Description Multi-Channel Analog AudioConnecting Fan Cables Connecting Fan and Power CablesConnecting 2x10 Power Supply Cables Connecting Power Cables2X12 PCI Bus Add-In Card Connectors Setting the Bios Configuration Jumper Block Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Clearing Passwords Back Panel Connectors Back Panel ConnectorsPrécaution Replacing the BatteryAvvertimento Awas Oсторога Bios Updating the Bios with the Iflash Memory Update Utility Obtaining the Bios Update FileUpdating the Bios Recovering the Bios Page System Requirements Trusted Platform Module OptionalPassword Procedures Security PrecautionsHard Drive Image Backup Procedures Emergency Recovery File Back Up ProceduresClear Text Backup Optional Trusted Platform ModuleTrusted Platform Module Ownership Enabling the Trusted Platform ModuleAssuming Trusted Platform Module Ownership Recovery Procedures How to Recover from Hard Disk FailureHow to Recover from Desktop Board or TPM Failure Requirements Software Support Clearing Trusted Platform Module OwnershipPage Memory Map Desktop Board ResourcesDMA Channels System Memory MapInterrupts InterruptsBios Beep Codes Error Messages and IndicatorsBeep Codes Number of Beeps DescriptionBios Error Messages Bios Error MessagesError Message Explanation Nvram / Cmos / Password Error Messages and IndicatorsPage Safety Regulations Safety RegulationsRegulatory Compliance European Union Declaration of Conformity StatementProduct Ecology Statements Disposal ConsiderationsRecycling Considerations EMC Regulations EMC RegulationsRegulatory Compliance Product Certification Markings Product Certification Markings Board Level

D915GAV, D915GEV, D915GUX, D915GAG specifications

The Intel D915GAG, D915GUX, D915GEV, and D915GAV are part of Intel's 915 chipset series, which was introduced to enhance the performance and capabilities of desktop computers in the mid-2000s. These motherboards provided users with a balanced combination of features suitable for both general computing and gaming needs.

The D915GAG motherboard features support for Intel Pentium 4 processors with the LGA 775 socket, providing robust performance for a range of applications. It supports a maximum of 4 GB of DDR2 RAM, ensuring that users can run multiple applications smoothly. The chipset supports a front-side bus speed of up to 800 MHz, facilitating quick data transfer rates that enhance overall system responsiveness.

The D915GUX variant is known for its enhanced graphics capabilities, featuring Intel Graphics Media Accelerator 900 integrated graphics. This component provides a decent visual experience for casual gaming and multimedia tasks without the need for a dedicated graphics card. The board also includes PCI Express x16 slots, enabling expansion for those who require higher graphical performance.

The D915GEV model stands out for its extensive connectivity options. It comes equipped with multiple USB 2.0 ports, SATA interfaces for faster data storage solutions, and built-in Ethernet to facilitate internet connectivity. The D915GEV is designed with stability and reliability in mind, making it suitable for use in both personal and professional environments.

Lastly, the D915GAV offers an alternative for users seeking a reliable and cost-effective chipset. It supports Intel’s SpeedStep technology, which dynamically adjusts processor voltage and frequency according to workload, optimizing energy consumption. This model emphasizes user-friendly performance, making it a practical choice for home users and small businesses alike.

All models support Intel Quiet System Technology, reducing fans' noise levels and maintaining an efficient cooling environment, which is essential for long-term reliability. Collectively, the Intel D915 series motherboards emphasize versatility, solid performance, and expanded connectivity options, making them a worthy choice for various computing needs during their time.