Intel D945GPM manual Connecting Ieee 1394a Headers, Connecting the Front Panel Header

Installing and Replacing Desktop Board Components

Connecting IEEE 1394a Headers

Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, B on page 39 for the location of the blue IEEE 1394a headers. Table 8 shows the pin assignments for the headers.

Table 8.	IEEE 1394a Header Signal Names
Pin	Signal Name	Pin	Signal Name
1	TPA1+	2	TPA1-
3	Ground	4	Ground
5	TPA2+	6	TPA2-
7	+12 V	8	+12 V
9	Key (no pin)	10	Ground

Connecting the Front Panel Header

Before connecting the front panel header, observe the precautions in "Before You Begin" on page 23. See Figure 20, E on page 39 for the location of the multi-colored front panel header.

Table 9 shows the pin assignments for the front panel header.

Table 9. Front Panel Header Signal Names

Pin	Signal	In/Out	Description
	Hard Drive	Activity	LED (Orange)
1	HD_PWR	Out	Hard disk LED pull-
			up (330 Ω) to +5 V
3	HDA#	Out	Hard disk active LED

Reset Switch (Purple)

5	Ground		Ground
7	FP_RESET#	In	Reset switch
9
	5+ V		Reserved. Do not use.

Pin	Signal	In/Out	Description
	Power	LED (Green)
2	HDR_BLNK_GRN	Out	Front panel green
			LED
4	HDR_BLNK_YEL	Out	Front panel yellow
			LED
	On/Off Switch (Red)
6	SWITCH_ON#	In	Power switch
8	Ground		Ground
10	No pin		No pin

Connecting Hi-Speed USB 2.0 Headers

Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, F on page 39 for the location of the black USB 2.0 headers.

Table 10 shows the pin assignments for the headers.

Table 10. Hi-Speed USB 2.0 Header Signal Names

	USB Port A
Pin	Signal name
1	Power
3	D-
5	D+

7Ground

9Key

	USB Port B
Pin	Signal name
2	Power
4	D-
6	D+
8	Ground
10	No connect

Note: USB ports may be assigned as needed.

41