Philips AECS7000 user manual Enable Bluetooth on your Bluetooth- enabled device

2Enable Bluetooth on your Bluetooth- enabled device.

3Select ‘Philips WeCall speaker‘ on your Bluetooth-enabled device and if necessary input ‘0000’ as the paring password.

»»The source indicator starts to flash blue.

»»After successful pairing and connection, the source indicator turns solid blue and the WeCall speaker beeps.

Note

•• To pair with a new Bluetooth-enabled device, you can:

•• 1. Hold CLEAR at the bottom of the WeCall speaker for more than 3 seconds to remove the existing Bluetooth connection.

•• 2. Disable the Bluetooth function on the currently connected device.

•• The WeCall speaker can memorize up to 4 paired devices.When you pair with another Bluetooth-enabled device, the first memorized device will be overridden.

Tip

•• For PC/Mac, to ensure stable performance, the USB connection mode is recommended.

Option 2: Connect through USB

The USB cable charges the WeCall speaker	l i sh
and can also be used to connect the WeCall	E n g
speaker to a PC/Mac to enjoy music or use it as
a speaker phone when you make VoIP calls.

1Slide the source switch at the bottom of the WeCall speaker to the USB position.

2Connect the WeCall speaker to a PC/Mac through the supplied USB cable.

»»The source indicator turns green.

EN 7