Intel BX400II user manual Introduction, Key Terms, Related Documents

1.0Introduction

This document introduces the BX400ii Interposer Board and provides installation instructions.

The BX400ii Interposer Board with the Intel® Mobile Pentium® II Processor emulates the functionality of the Intel® Pentium® II Processor Mobile Module to provide a bus interconnect for emulation and logic analysis tools. This board is used for Intel Pentium II Processor Mobile Module system designs.

Note: Due to additional signal loading and trace lengths, the BX400ii Interposer Board may not function in all system designs.

1.1Key Terms

LPM refers to the Intel® Low Power Pentium® II Processor module. This module is identical to the Intel Pentium II Processor Mobile Module Connector (MMC-2). A complete description of this module is located in the Intel® Pentium® II Processor Mobile Module: Mobile Module Connector

2(MMC-2)datasheet (http://developer.intel.com/design/mobile/datashts).

82443BX refers to the Intel 82443BX Host Bridge Controller.

1.2Related Documents

Table 1. Related Documents

		Document	Order #
Intel®	Pentium®	II Processor Mobile Module: Mobile Module Connector 2 (MMC-2) datasheet	243668
Intel®	Pentium®	II Processor at 233 MHz, 266 MHz and 300 MHz datasheet	243669
Mobile Pentium®		II Processor Specification Update	243887
Intel®	440BX AGPset: 82443BX Host Bridge/Controller datasheet		290633

Table 2. Vendor Reference†

Vendor Name		Contact Information
American Arium	(714)	731-1661
	http://www.arium.com/aaprod.htm
Applied Microsystems Corporation	(800)	426 3925
	http:/www.amc.com
Hewlet Packard	(800)	452-4844
	http://www.tmo.hp.com
Microtek International	(800)	886-7333
	http://www.microtekintl.com
Tektronix	(800) TEK-WIDE
	http://www.tek.com
Ironwood Electronics (for adapters only)	(800)	404-0204
	http://www.ironwoodelectronics.com

†Intel does not endorse or recommend third-party vendors.

BX400ii Interposer Board User’s Manual 5