Intel DQ57TM Energy STAR*, e-Standby, and ErP Compliance, Wake from USB, Wake from Serial Port

Page 31

Desktop Board Features

Wake from USB

NOTE

Wake from USB requires the use of a USB peripheral that supports Wake from USB and an operating system that supports Wake from USB.

USB bus activity wakes the computer from an ACPI S1 or S3 state.

PCI PME# Signal Wake-up Support

When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state.

PCI Express WAKE# Signal Wake-up Support

When the WAKE# signal on a PCI Express bus add-in card is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state.

Wake from Serial Port

Serial port activity wakes the computer from an ACPI S1 or S3 state.

ENERGY STAR*, e-Standby, and ErP Compliance

The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of the new requirements.

Intel Desktop Board DQ57TM meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply:

Energy Star v5.0, category A

EPEAT

Korea e-Standby

European Union Energy-related Products Directive 2009 (ErP)

For information about ENERGY STAR requirements and recommended configurations, go to http://www.intel.com/go/energystar.

31

Image 31
Contents Intel Desktop Board DQ57TM Product Guide Canadian Department of Communications Compliance Statement FCC Declaration of ConformityDisclaimer Conventions Intended AudienceUse Only for Intended Applications Document OrganizationIntel Desktop Board DQ57TM Product Guide TerminologyTerm Description Contents Error Messages and Indicators Regulatory Compliance ContentsTables Processor Support Feature SummaryInstantly Available PeripheralInterfaces LAN SupportSupported Operating Systems Desktop Board FeaturesIntel Desktop Board DQ57TM Components Desktop Board ComponentsLabel Description Online Support ProcessorMain Memory Intel Q57 Express ChipsetDigital Visual Interface Graphics SubsystemIntegrated Graphics DisplayPortPCI Express* x16 Graphics Audio SubsystemLED Color LED State Indicates LAN SubsystemUSB 2.0 Support Intel Rapid Recover Technology Intel RRTSata Support Legacy I/O Sata Auto ConfigurationPCI*/PCI Express Auto Configuration ExpandabilityPassword Set Password During Boot Bios Security PasswordsHard Disk Drive Passwords Master Key and User Hard Disk Drive Password FunctionsEnter Hard Disk Drive Password Intel vPro Technology Platform Management and ProtectionIntel Active Management Technology Intel AMT Intel AMT Software and Drivers Intel ME M State LED Behavior Intel ME M State LEDSx/M3 Sx/Moff S0/M0 LED blinks Off Intel Trusted Execution Technology Intel TXT Intel Virtualization Technology Intel VTIntel Remote PC Assist Intel Rpat and Fast Call for Help Trusted Platform Module TPM Fan Speed Control and Hardware MonitoringHardware Support Power ManagementPower Connectors Software SupportInstantly Available PC Technology LAN Wake CapabilitiesLocation of the Standby Power Indicator +5 V Standby Power Indicator LEDWake from USB PCI PME# Signal Wake-up SupportPCI Express WAKE# Signal Wake-up Support Energy STAR*, e-Standby, and ErP ComplianceReal-Time Clock Subsystem Onboard SpeakerBefore You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldIntel Desktop Board DQ57TM Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Socket Cover Remove the Processor from the Protective Cover Lower the Load Plate Connecting the Processor Fan Heat Sink Cable Installing a Processor Fan Heat SinkRemoving the Processor Guidelines for Dual Channel Memory Configuration Installing and Removing System MemoryTwo or Four DIMMs Three DIMMs Example Dual Channel Memory Configuration with Four DIMMsUse DDR3 DIMMs Installing DIMMsInstalling a Dimm Installing a PCI Express x16 Graphics Card Installing and Removing PCI Express x16 Graphics CardsRemoving DIMMs Installing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics CardConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers Connecting to the Internal HeadersInternal Mono Speaker Header Front Panel Audio Signal Names for Intel HD AudioFront Panel Audio Header Signal Names for AC ’97 Audio Front Panel Audio HeaderPdif Header Alternate Front Panel Power LED HeaderChassis Intrusion Header Front Panel USB 2.0 Headers Front Panel Header Signal NamesUSB 2.0 Headers Signal Names Front Panel HeaderSerial Header Intel Rpat Header Signal NamesPin Signal Name RXD# Receive Data Intel Rpat HeaderBack Panel Audio Connectors Connecting to the Audio SystemConnecting Chassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Connecting Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Clearing Passwords in the Bios Setup ProgramJumper Setting Mode Description Jumper Mode Description Clear Cmos Jumper SettingsClearing Cmos Memory Location of the Clear Cmos Memory Jumper Block Replacing the BatteryPrécaution Προσοχή Precauţie Intel Desktop Board DQ57TM Product Guide Removing the Battery Intel Desktop Board DQ57TM Product Guide Updating the Bios Obtaining the Bios Update File Updating the Bios Updating the Bios with the ISO Image Bios Update FileRecovering the Bios Updating the Bios with the Iflash Memory Update UtilityBios Beep Codes Bios Error CodesType Pattern Frequency/Comments Error Message Explanation Bios Error MessagesFront-panel Power LED Blink Codes Bios Error MessagesRegulation Title Safety StandardsPlace Battery Marking Safety StandardsEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Malay DeutschEspañol FrançaisRussian PortugueseTürkçe Lead-free 2LI/Pb-free 2LI Board Description Mark Restriction of Hazardous Substances RoHSEU RoHS Lead-Free Second Level Interconnect MarksChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DQ57TM Product Guide

DQ57TM specifications

The Intel DQ57TM is a versatile and powerful micro ATX motherboard designed primarily for business and industrial use. This motherboard is part of Intel's Q57 chipset family and supports the latest Intel Core processors, offering robust performance and advanced features that cater to the needs of both professional and everyday users.

One of the standout features of the DQ57TM is its support for Intel vPro technology. This feature allows IT departments to manage systems more efficiently, providing remote management and security capabilities that are essential for enterprise environments. With vPro, administrators can perform tasks like remote rebooting or updating BIOS even if the operating system is not responsive, safeguarding business continuity.

The DQ57TM also boasts support for Intel's Turbo Boost technology, which dynamically adjusts the processor’s frequency based on workload demands. This ensures enhanced performance during intensive tasks while optimizing power consumption during lighter workloads, allowing users to enjoy greater efficiency. Coupled with support for up to 16 GB of DDR3 memory in four slots, the motherboard can handle demanding applications and multitasking with ease.

In terms of connectivity, the DQ57TM features multiple USB 2.0 and USB 3.0 ports, providing high-speed data transfer capabilities. It also includes a legacy PS/2 connector for compatibility with older peripherals. The integrated Intel HD Graphics offer solid performance for everyday tasks and light gaming, along with HDMI and DisplayPort outputs that ensure high-definition video output.

Storage options are generous, as the motherboard supports both SATA II and SATA III interfaces, facilitating fast data access and transfer rates for SSDs and HDDs alike. The RAID support (0, 1, 5, and 10) further enhances data redundancy and performance, making it an excellent choice for data-critical applications.

The DQ57TM also emphasizes security features, including Intel Trusted Execution Technology and various BIOS security options, which assist in protecting sensitive information against malware and unauthorized access.

Overall, the Intel DQ57TM motherboard merges performance, manageability, and security, making it an ideal choice for small businesses and enterprise users looking for a reliable and efficient computing solution. Its combination of modern technologies and solid build quality ensures that it can meet diverse computing demands in today’s fast-paced environment.