Replacing the Battery, Précaution | Intel BLKDH67GDB3 guide

Intel Desktop Board DH67GD Product Guide

6.Replace the cover, plug in the computer, turn on the computer, and allow it to boot.

7.The computer starts the Setup program. Setup displays the Maintenance menu.

8.Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a pop-up screen requesting that you confirm clearing the password. Select Yes and press <Enter>. Setup displays the maintenance menu again.

9.Press <F10> to save the current values and exit Setup.

10.Turn off the computer. Disconnect the computer’s power cord from the AC power source.

11.Remove the computer cover.

12.To restore normal operation, place the jumper on pins 1-2 as shown below.

13.Replace the cover, plug in the computer, and turn on the computer.

Replacing the Battery

A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 °C with 3.3 VSB applied.

When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be accurate. Replace the battery with an equivalent one. Figure 25 on page 59 shows the location of the battery.

CAUTION

Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.

PRÉCAUTION

Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible. La mise au rebut des piles usagées doit respecter les réglementations locales en vigueur en matière de protection de l'environnement.

G13841-001, BLKDH67GDB3, DH67GD specifications

The Intel DH67GD motherboard, also known by the model number BLKDH67GDB3, is a high-performance motherboard designed primarily for Intel’s second-generation Core processors, also known as the "Sandy Bridge" architecture. This motherboard is particularly well-suited for users seeking a blend of performance, advanced features, and compatibility, making it a popular choice for both desktop builds and upgrades.

One of the standout features of the DH67GD is its support for Intel's latest processing technology, allowing for dual-channel DDR3 memory with speeds of up to 1333/1600 MHz. This enables improved memory bandwidth and responsiveness, essential for multitasking and demanding applications. The motherboard supports a maximum memory capacity of 32GB, ensuring ample RAM for gaming, content creation, and other intensive tasks.

The DH67GD is equipped with a variety of connectivity options, featuring four SATA II ports for connecting hard drives and SSDs, alongside two SATA III ports that support faster data transfer speeds. Users can benefit from rapid storage access, which is crucial for modern applications and operating systems. Additionally, the inclusion of RAID 0, 1, 5, and 10 support enhances data redundancy and performance, appealing to users who prioritize data safety.

Graphics capabilities are robust, with support for Intel HD Graphics integrated into the supported processors. The motherboard provides HDMI, DVI, and VGA outputs, ensuring compatibility with a wide range of displays. This flexibility allows for a straightforward transition to high-definition multimedia applications without necessitating a discrete graphics card.

The DH67GD also incorporates several modern technologies, including Intel Smart Connect Technology, which allows for seamless synchronization of applications and data while the system is in sleep mode. The board supports USB 3.0 for rapid file transfers and external device connectivity, significantly outpacing earlier USB standards.

Moreover, the Intel DH67GD motherboard is characterized by its reliable build quality and straightforward BIOS, which aids in easy setup and configuration. The board features ample expansion slots, including PCI Express x16 for graphics cards and PCI Express x1 for add-in cards, providing users the flexibility to upgrade their systems according to their needs.

In summary, the Intel DH67GD, BLKDH67GDB3, G13841-001 motherboard combines a strong set of features, modern technologies, and excellent compatibility with Intel's second-generation processors, making it a solid choice for both casual and power users alike.