Installing and Replacing Desktop Board Components
Figure 18. Installing a DIMM
5.Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position.
6.Holding the DIMM by the edges, remove it from its
7.Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the keys in the socket (see inset in Figure 18).
8.Insert the bottom edge of the DIMM into the socket.
9.When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place.
10.Reinstall the PCI Express x16 card if it was removed prior to installing the DIMMs.
11.Replace the computer’s cover and reconnect the AC power cord.
37