Intel D975XBX manual Error Messages and Indicators, Bios Beep Codes, Bios Error Messages

Page 67

A Error Messages and Indicators

Desktop Board D975XBX reports POST errors in two ways:

By sounding a beep code

By displaying an error message on the monitor

BIOS Beep Codes

The BIOS beep codes are listed in Table 10. The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the video configuration fails (a faulty graphics card or no card installed) or if an external ROM module does not properly checksum to zero.

Table 10.

Beep Codes

 

 

 

Beep

 

Description

 

 

 

3

 

No memory

 

 

 

Siren

 

CPU overheat (on reboot)

 

 

 

BIOS Error Messages

When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem.

Table 11. BIOS Error Messages

Error Message

Explanation

 

 

PROCESSOR_THERMAL_TRIP_ERROR

CPU was previously shutdown due to a thermal event

 

(overheating).

 

 

MULTI_BIT_ECC_ERROR

The firmware has detected that a Multi-Bit ECC Error occurred.

 

 

SINGLE_BIT_ECC_ERROR

The firmware has detected that a Single-Bit ECC Error occurred.

 

 

CMOS_BATTERY_ERROR

The firmware has detected that a CMOS battery failure occurred.

 

 

CMOS_CHECKSUM_ERROR

The firmware has detected that a CMOS Checksum Error

 

occurred.

 

 

CMOS_TIMER_ERROR

The firmware has detected that the system date/time has not

 

been set.

 

 

MEMORY_SIZE_DECREASE_ERROR

The firmware has detected that the system memory has

 

decreased.

 

 

INTRUDER_DETECTION_ERROR

The system chassis was opened.

 

 

SPD_TOLER_ERROR

SERIAL PRESENCE DETECT (SPD) device data missing or

 

inconclusive. Properly programmed SPD device data is required

 

for reliable operation. DDR2 533 MHz memory assumed at

 

slowest timings.

 

 

MEM_OPTIMAL_ERROR

The installed amount of memory in Channel A is not equal to the

 

amount of memory in Channel B. Maximum memory

 

performance is achieved with equal amounts of memory

 

installed in each channel.

 

 

67

Image 67
Contents Intel Desktop Board D975XBX Product Guide Canadian Department of Communications Compliance Statement Revision HistoryRevision Revision History Date FCC Declaration of ConformityInformation Layout PrefaceIntended Audience Intended UsesTerminology Box ContentsContents Bios Regulatory Compliance ContentsTables Feature Summary Desktop Board FeaturesHardware Management Power ManagementSupported Operating Systems Peripheral InterfacesDesktop Board Components Desktop Board FeaturesLabel Description Main Memory Power Supply RequirementsPlatform Compatibility Guide Power Supply Requirements ProcessorAudio Subsystem Intel 975X Express ChipsetLAN Subsystem Input/Output I/O ControllerLAN Subsystem Software LED Color LED State Indicates RJ-45 LAN Connector LEDsRJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs Hi-Speed USB 2.0 SupportExpandability Serial ATA and IDE Auto ConfigurationEnhanced IDE Interface Serial ATAChassis Intrusion Power Management FeaturesPCI and PCI Express* Auto Configuration Security PasswordsFan Speed Control Intel Precision Cooling Technology Fan ConnectorsSuspend to RAM Instantly Available PC Technology PME# Wakeup Support Resume on RingWake from USB Wake from PS/2* Keyboard/MouseSpeaker BatteryReal-Time Clock Intel Desktop Board D975XBX Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldLocation of Mounting Screw Holes Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorRemove the Protective Socket Cover Install the Processor Connecting the Processor Fan Heat Sink Cable Installing the Processor Fan Heat SinkRemoving the Processor Guidelines for Dual Channel Memory Configuration Installing and Removing MemoryTwo or Four DIMMs Three DIMMs Installing DIMMsDDR DDR2 Installing a Dimm Removing DIMMs Installing and Removing a PCI Express x16 CardInstalling PCI Express Graphics Cards Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Removing the PCI Express x16 CardConnecting the IDE Cable Connecting the IDE CableConnecting Serial ATA Cables Connecting the Serial ATA CableItem Description Connecting Internal HeadersIeee 1394a Header Front Panel Audio HeaderUSB 2.0 Headers Front Panel Header Signal Names Alternate Front Panel Power LED HeaderFront Panel Header Connecting the Rear Panel USB 2.0 Adapter Installing the Rear Panel USB 2.0 AdapterConnecting the Front Panel USB/IEEE 1394/Audio Cables Installing the Front Panel USB/IEEE 1394/Audio AdapterLocation of Fan Headers Connecting Chassis Fan CablesConnecting 2x10 Power Supply Cables Connecting Power Supply CablesConnecting 2x12 Power Supply Cables Connecting 2x12 Power Supply CablesLocation of Other Connectors Other ConnectorsJumper Settings for the Bios Setup Program Modes Setting the Bios Configuration JumperJumper Setting Mode Description Clearing Passwords Back Panel Connectors Back Panel ConnectorsPrecaution Replacing the BatteryAvvertimento Awas Uyari Intel Desktop Board D975XBX Product Guide Updating the Bios Accessing the Bios Setup ProgramObtaining the Bios Update File Updating the Bios with the Iflash Memory Update UtilityUpdating the Bios Recovering the Bios Intel Desktop Board D975XBX Product Guide Configuring the Bios for Intel Matrix Storage Technology Configuring for RAID Intel Matrix Storage TechnologyCreating Your RAID Set Setting Up a RAID Ready System Intel Quick Resume Technology Driver Intel Qrtd Installation and ConfigurationOverview Intel Desktop Board D975XBX Product Guide Intel Quick Resume Technology Driver Intel Desktop Board D975XBX Product Guide Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board D975XBX Product Guide Regulatory Compliance Safety RegulationsPlace Battery Marking Safety RegulationsEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Français Lead-Free Board Markings Lead-Free Desktop BoardEMC Regulations EMC RegulationsEnsure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board D975XBX Product Guide

D975XBX specifications

The Intel D975XBX motherboard, also known as the "Bad Axe," is a high-performance platform designed for enthusiasts and gamers who demand exceptional computing power and advanced features. Launched in the mid-2000s, this motherboard is built around the Intel 975X chipset, which supports Intel's Core 2 Duo and Core 2 Extreme processors. The D975XBX was particularly noted for its capabilities in overclocking, making it a popular choice among PC builders and gamers looking to maximize performance.

One of the standout features of the Intel D975XBX is its support for dual-channel DDR2 memory. The motherboard has four DIMM slots, allowing users to install up to 8GB of RAM, with speeds up to 800 MHz. This high memory bandwidth significantly enhances system performance, especially in memory-intensive applications and gaming scenarios. Additionally, the board supports Advanced Memory Protection technologies like ECC (Error-Correcting Code) when used with compatible memory modules.

Storage connectivity is another strong point of the D975XBX. It features six SATA II ports, providing ample room for multiple hard drives or solid-state drives. This is complemented by support for Intel Matrix Storage Technology, which allows for RAID 0, 1, 5, and 10 configurations, ensuring data integrity and improved performance through redundancy. For those who prefer legacy support, the motherboard also includes an IDE port for connecting older drives.

In terms of graphics capabilities, the D975XBX has two PCI Express x16 slots, enabling users to install multiple graphics cards for enhanced performance in gaming or graphic design applications. The board also supports CrossFire technology, allowing for dual graphics card configurations from AMD.

The Intel D975XBX is equipped with an array of onboard features, including seven USB 2.0 ports, a dual Gigabit Ethernet controller for high-speed networking, and 7.1 surround sound audio support, making it versatile for various multimedia applications. The board's BIOS includes a user-friendly interface and comprehensive overclocking options, allowing users to fine-tune system settings for optimal performance.

Overall, the Intel D975XBX remains a noteworthy option for those interested in building a powerful PC. Its solid feature set, support for legacy technologies, and overclocking potential continue to attract enthusiasts looking for a reliable and high-performance motherboard. Whether for gaming, multimedia tasks, or everyday computing, the D975XBX delivers a well-rounded experience that has stood the test of time.