Intel D945GSEJT manual Desktop Board Features, Feature Summary

Page 9

1 Desktop Board Features

This chapter briefly describes the main features of Intel® Desktop Board D945GSEJT. Table 1 summarizes the features of the Desktop Board.

Table 1. Feature Summary

Form Factor

Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170 millimeters

 

[6.7 inches] x 170 millimeters [6.7 inches])

Processor

Passively-cooled, soldered-down Intel® Atomprocessor N270

Main Memory

One 200-pin Double Data Rate 2 (DDR2) Small Outline Dual Inline

 

 

Memory Module (SO-DIMM) socket with gold-plated contacts

 

Support for DDR2 533 MHz SO-DIMMs (DDR2 800 MHz and

 

 

DDR2 667 MHz validated to run at 533 MHz only)

 

Support for up to 2 GB of system memory

Chipset

Passively cooled mobile Intel® 945GSE Express Chipset consisting of:

 

Intel® 82945GSE Express Chipset Graphics and Memory Controller

 

 

Hub (GMCH)

 

Intel® 82801GBM I/O Controller Hub (ICH7-M)

Internal Graphics

Intel® Graphics Media Accelerator 950 (Intel® GMA 950) onboard

 

graphics subsystem with support for:

 

Analog displays (VGA)

 

Digital displays (DVI-D)

Audio

RealTek* ALC662 audio codec for 2 + 2-channel (multi-streaming)

 

Intel® High Definition Audio (Intel® HD Audio):

 

Front panel microphone/headphone header

 

S/PDIF digital audio header

 

Internal mono speaker header

Expansion

One PCI* bus add-in card connector

Capabilities

One PCI Express* Full-Mini Card slot

Peripheral

Seven USB 2.0 ports:

Interfaces

 

― Three back panel ports

 

 

― Four front panel ports (via two internal headers; one header

 

 

supports an Intel® Z-U130 USB Solid-State Drive (or compatible

 

 

device))

 

One parallel ATA (PATA) interface (44-pin) with ATA-100/66 support

 

Two Serial ATA (SATA) 3.0 Gb/s connectors (supporting IDE and

 

 

ACHI)

 

One SATA device power connector

Legacy I/O Control

Winbond* W83627DGH-A legacy I/O controller:

 

Two serial port headers

 

One parallel port header

 

One PS/2 keyboard header

Hardware Monitor

Hardware monitoring through the Winbond I/O controller

Subsystem

Voltage sense to detect out of range power supply voltages

 

Thermal sense to detect out of range thermal values

 

One fan header

 

One fan sense input used to monitor fan activity

 

Fan speed control

9

Image 9
Contents Intel Desktop Board D945GSEJT Product Guide Revision Revision History Date Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementIntended Audience PrefaceIntended Uses Document OrganizationTerminology Intel Desktop Board D945GSEJT Product GuideTerm Description Contents Board Status and Error Messages Tables ContentsChina RoHS Environmentally Friendly Use Period Mark Feature Summary Desktop Board FeaturesPower LAN SupportManagement To find information Visit this World Wide Web site About… Desktop Board FeaturesIntel Desktop Board D945GSEJT Components Desktop Board ComponentsLabel Description Processor System MemoryMobile Intel 945GSE Express Chipset Intel GMA950 Graphics Controller Intel 945GSE Graphics SubsystemVideo Memory Allocation Analog Display VGA SupportOperating System Support Onboard Audio SubsystemDigital Visual Interface DVI Support Legacy Input/Output I/O Controller Network Bootloader SupportLAN Subsystem LAN Status LEDsLED Color LED State Indicates USB 2.0 Support Mass Storage SupportPata Interface PCI/PCI Express Auto Configuration ATA Auto ConfigurationExpandability Sata InterfaceSecurity Passwords +5 V Standby Power Indicator LED Power Management FeaturesHardware Support Fan HeaderLocation of the Standby Power Indicator Instantly Available PC Technology WAKE# Signal Wakeup SupportLAN Wake Capabilities Wake from USBEnergy STAR*, e-Standby, and EuP Compliance BatteryReal-Time Clock Energy Star RequirementsIntel Desktop Board D945GSEJT Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldIntel Desktop Board D945GSEJT Mounting Screw Holes Installing and Removing the Desktop BoardInstalling System Memory Installing System MemoryRemoving System Memory Connecting Sata DrivesConnecting the Sata Data and Power Cables Installing a Wireless LAN Card Installing and Replacing Desktop Board Components Internal Headers and Connectors Connecting to the Internal Headers and ConnectorsInternal Connectors and Headers Internal Connectors and HeadersPin Signal Name Pin Signal Name RXD# Receive DataPata Connector 44-Pin PS/2 Keyboard Port HeaderChassis Fan Header Pin Standard Signal Name ECP Signal Name EPP Signal Name Sata Power ConnectorChassis Intrusion Header Parallel Port HeaderPdif Header Front Panel Wireless Activity LED HeaderInternal Mono Speaker Header Front Panel Audio Header for Intel HD AudioFront Panel USB Header Add-in Card ConnectorsPower Supply Connectors ATX12V Power ConnectorFront Panel Header Front Panel Header Reset Switch PinsStates for a One-Color Power LED Power/Sleep LED PinsPower Switch Pins Front Panel USB HeadersInstalling and Replacing Desktop Board Components Location of the Chassis Fan Header Connecting a Chassis FanBios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Précaution Replacing the BatteryViktigt Προσοχή Uyari Removing the Battery Intel Desktop Board D945GSEJT Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the Iflash Memory Update Utility Obtaining the Bios Update FileUsing the Iflash Memory Update Utility Acceptable Drives/Media Types for Bios Recovery Recovering the BiosUpdating the Bios Media Type Can be used for Bios recovery?Intel Desktop Board D945GSEJT Product Guide Front-panel Power LED Blink and Internal Speaker Beep Codes Board Status and Error MessagesFront-panel Power LED Blink and Internal Speaker Beep Codes Type PatternPost Error Messages Post Error MessagesError Message Explanation Place Battery Marking Safety StandardsSafety Standards Regulatory ComplianceEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Español DeutschFrançais MalayPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board Lead-Free Second Level Interconnect MarksDescription Mark European Union RoHS Restriction of Hazardous Substances RoHSChina RoHS China RoHS Environmentally Friendly Use Period MarkIntel Desktop Board D945GSEJT Product Guide EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component Certifications

D945GSEJT specifications

The Intel D945GSEJT is a compact motherboard designed for use in embedded systems and low-power computing applications. Released as part of Intel's 945GSE chipset family, it is equipped with a range of features and technologies that cater to the growing demand for efficient computing solutions.

At the heart of the D945GSEJT is the Intel Atom N270 processor, which operates at a frequency of 1.6 GHz. This processor is known for its low power consumption, making it an excellent choice for devices that require continuous operation without significant energy demands. The D945GSEJT operates with a thermal design power (TDP) of merely 5 watts, allowing it to run quietly and efficiently, thus extending the lifespan of the device.

In terms of memory support, the D945GSEJT features two DIMM slots that can accommodate up to 2 GB of DDR2 SDRAM. This enables adequate multitasking capabilities, allowing the system to run multiple applications simultaneously without performance degradation. Additionally, the motherboard supports a memory speed of 533 MHz and 667 MHz.

One of the key characteristics of the D945GSEJT is its integrated graphics capability, featuring the Intel Graphics Media Accelerator 950. This technology supports resolution up to 2048 x 1536 at 75Hz, making it suitable for basic graphical tasks such as web browsing and video playback. The inclusion of an array of output options like LVDS, VGA, and TV-out enhances its versatility for various display needs.

The D945GSEJT also boasts a variety of I/O ports, including six USB 2.0 ports, a parallel port, a serial port, and multiple audio connectors. This wide array of connectivity options allows users to attach peripherals like printers, keyboards, and external audio devices easily.

Moreover, the motherboard includes support for Intel’s SpeedStep technology, which dynamically adjusts processor voltage and frequency, helping to optimize power consumption based on workload demands. This capability is essential for embedded systems where power efficiency is paramount.

To summarize, the Intel D945GSEJT is a robust motherboard that combines efficient processing power with a compact footprint. Its main features include support for low power consumption via the Atom N270 processor, integrated graphics, adequate memory options, and a wide range of I/O ports. These traits make it an ideal choice for embedded applications, digital signage, and other compact computing environments.