Installing and Replacing Desktop Board Components
Installing an Intel®
An Intel
To install an Intel
1.Observe the precautions in "Before You Begin" on page 27.
2.Align the connector (Figure 22, A) on the bottom of the solid state drive with the USB 2.0 header on the Desktop Board. The connectors are keyed and will mate correctly when the solid state drive is oriented as shown in Figure 22.
3.Secure the solid state drive to the Desktop Board with the screw (Figure 22, B) included with the board.
Figure 22. Installing an Intel Z-U130 USB Solid-State Drive
(or Compatible Device)
If not used with an Intel
45