Intel Duo/Solo 945GM, 2804080 user manual PNP/PCI Configurations

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Init Display First	PCI Slot
Reset Configuration Data	Disabled
Resources Controlled By	Auto (ESCD)
IRQ Resources	Press Enter
PCI/VGA Palette Snoop	Disabled
INT Pin 1 Assignment	Auto
INT Pin 2 Assignment	Auto
INT Pin 3 Assignment	Auto
INT Pin 4 Assignment	Auto
INT Pin 5 Assignment	Auto
INT Pin 6 Assignment	Auto
INT Pin 7 Assignment	Auto
INT Pin 8 Assignment	Auto
**PCI Express relative items**	4096
Maximum Payload Size

ITEM HELP

Menu Level

Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure non-boot devices

Init Display First

The default setting is PCI Card.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices with the use of a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

Maximum Payload Size

The default setting of the PCI Express Maximum Payload Size is 4096.

46 2804080 User’s Manual