BIOS SETUP
Time
The time format is: Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time.
IDE Primary HDDs / IDE Secondary HDDs
The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four IDE hard disks or other IDE devices. Each channel can support up to two hard disks; the first is the “Master” and the second is the “Slave”.
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and None. Select ‘Manual’ to define the drive information manually. You will be asked to enter the following items.
CYLS : |
| Number of cylinders |
HEAD : |
| Number of read/write heads |
PRECOMP : | Write precompensation | |
LANDING ZONE : | Landing zone | |
SECTOR : | Number of sectors | |
The Access Mode selections are as follows: | ||
CHS | (HD < 528MB) |
|
LBA | (HD > 528MB and supports Logical Block Addressing) | |
Large | (for | |
Auto |
|
|
Remarks: The board supports two serial ATA ports that are represented in this setting as IDE Channel 2 / 3 Master.
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has been installed in the computer. The available specifications are:
360KB 1.2MB 720KB 1.44MB 2.88MB 5.25 in. 5.25 in. 3.5 in. 3.5 in. 3.5 in.
37 |