Intel SASMF8I manual Electrical Characteristics, Thermal and Atmospheric Characteristics

Electrical Characteristics

This section provides the power requirements for the RAID Controller SASMF8I. Table 5 lists the maximum power requirements.

Table 5. Electrical Characteristics

		PCI / PCI		Operating
PCI / PCI Express*		Express /	PCI PRSNT1# / 2#
	PCI / +5.0 V			Range
/ Express +12 V		Express	Power
				Temperature
		+3.3 V
N/A	N/A	1 A	3.2 W	0° C to 45° C

Thermal and Atmospheric Characteristics

The thermal and atmospheric characteristics are:

•Relative humidity range: 5% to 90% non-condensing

•Maximum dew point temperature: 32° C

•Airflow must be at least 200 linear feet per minute (SFPM) to avoid operating above the maximum ambient temperature

The storage and transit environment conditions are:

•Temperature range from -30° C to 80° C (dry bulb).

•Relative humidity range: 5% to 90% non-condensing

Safety Characteristics

The RAID Controller SASMF8I meets or exceeds the requirements of UL flammability rating 94 V0. Each bare board is also marked with the supplier name or trademark, type, and UL flammability rating. For the boards installed in a PCI Express* bus slot, all voltages are lower than the SELV 42.4 V limit.

The design and implementation minimizes electromagnetic emissions, susceptibility to radio frequency energy, and the effects of electrostatic discharge. The adapter carries the CE mark, C-tick mark, FCC self-certification logo, Canadian compliance statement, Korean MIC, Taiwan BSMI, and Japan VCCI. The adapter meets the requirements of CISPR Class B. Both the adapter is CCSA C22.2, No. 60950-1, UL60950-1 First Edition listed accessory, UL filenumber E257743.

Intel® RAID Controller SASMF8I Hardware Guide 16