Intel S5000PAL manual Additional Boot Options

Page 15

Installing Red Hat* Enterprise Linux 4*

Intel® Server Board S5000PAL

Tip: To change your BIOS settings on an x86 or Intel® 64 system, watch the instructions provided on your display when your computer first boots. A line of text appears, telling you which key to press to enter the BIOS settings.

3)Once you have entered your BIOS setup program, find the section where you can alter your boot sequence. The default is often C, A or A, C (depending on whether you boot from your hard drive [C] or a diskette drive [A]). Change this sequence so that the CD-ROM is first in your boot order and that C or A (whichever is your typical boot default) is second. This instructs the computer to first look at the CD-ROM drive for bootable media; if it does not find bootable media on the CD-ROM drive, it then checks your hard drive or diskette drive.

4)Save your changes before exiting the BIOS. For more information, refer to the documentation that came with your system.

5)After a short delay, a screen containing the boot: prompt should appear. The screen contains information on a variety of boot options. Each boot option also has one or more help screens associated with it. To access a help screen, press the appropriate function key as listed in the line at the bottom of the screen.

6)As you boot the installation program, be aware of two issues:

7)Once the boot: prompt appears, the installation program automatically begins if you take no action within the first minute. To disable this feature, press one of the help screen function keys.

8)If you press a help screen function key, there is a slight delay while the help screen is read from the boot media.

Normally, you only need to press [Enter] to boot. Be sure to watch the boot messages to review if the Linux kernel detects your hardware. If your hardware is properly detected, continue to the next section. If it does not properly detect your hardware, you may need to restart the installation and use one of the boot options provided in Appendix A “Additional Boot Options”.

Additional Boot Options

While it is easiest to boot using a CD-ROM and perform a graphical installation, sometimes there are installation scenarios where booting in a different manner may be needed. This section discusses additional boot options available for Red Hat Enterprise Linux.

For x86 and Intel® 64 users:

To pass options to the boot loader on an x86 or Intel® 64 system, use the instructions as provided in the boot loader option samples below.

15

Image 15
Contents Installing Red Hat* Enterprise Linux Contents Appendix a Additional Boot Options Reseller Steps to Receive Pass-Thru OS Certification Red Hat Linux Pass-Through Hardware RequirementsHardware Components ConfigurationSAS RAID CD-ROM Installed Module 1064e SAS I/O Embedded mptsas Quantity Model/Version Software Used in the Installation Graphical Installation Program User Interface Red Hat* Enterprise Linux 4* InstallationConsole, Keystrokes, and Contents Installation Program Widgets as seen in Disk Druid Text Mode Installation Program User InterfaceUsing the Keyboard to Navigate Booting the Installation Program on x86 and Intel 64 Systems Starting the Installation ProgramAdditional Boot Options Linux mediacheck Kernel OptionsInstalling from CD-ROM Selecting an Installation MethodWhat If the IDE CD-ROM Was Not Found? Installing from a Hard Drive Performing a Network InstallationInstalling via NFS Next, enter the name of the exported directory Installing via Http Installing via FTPWelcome to Red Hat Enterprise Linux Http Setup DialogLanguage Selection Language SelectionDisk Partitioning Setup Keyboard ConfigurationAutomatic Partitioning Disk Partitioning Setup10. Automatic Partitioning Graphical Display of Hard Drives Partitioning Your SystemDisk Druid’s Buttons Recommended Partitioning Scheme Partition FieldsPage Page 12. Partitioning with Disk Druid on x86 and Intel 64 Systems Adding PartitionsFile System Types X86 and Intel 64 Boot Loader Configuration Editing PartitionsDeleting a Partition Page 13. Boot Loader Installation Advanced Boot Loader ConfigurationAlternative Boot Loaders Rescue ModeSMP Motherboards and Grub 14. Network Configuration Network Configuration15. Editing a network Device ∙ Enable firewall Firewall ConfigurationMake -C /etc/mail Language Support Selection 17. Language Support Selection 18. Configuring the Time Zone Time Zone Configuration19. Root Password Set Root PasswordPackage Group Selection 20. Package Group Selection Preparing to Install Installing PackagesInstallation Complete Page Appendix a Additional Boot Options Page Nofb Page Copyright 2006, Intel Corporation. All Rights Reserved
Related manuals
Manual 16 pages 9.13 Kb Manual 80 pages 8.91 Kb