Intel SE7525GP2 manual Pass/Fail Test Criteria

Intel® Server Board SE7525GP2 Introduction

•Intel will go through some of the steps to achieve certification to ensure its customers do not run across any problems, but the actual certification is the responsibility of the individual customer.

For operating systems, adapter cards, and peripherals not listed in this document, there is no support commitment. Intel will consider support requests on a case-by-case basis.

1.2Pass/Fail Test Criteria

For each operating system, adapter, and peripheral configuration, a test passes if specific criteria are met. Specific configurations may have had particular characteristics that were addressed on a case-by-case basis. In general, a configuration passes testing if the following conditions are met:

•The operating system installed without error.

-Manufacturer’s installation instructions or Intel’s best-known methods were used for the operating system installation.

-No extraordinary workarounds were required during the operating system installation.

-The server system behaved as expected during and after the operating system installation.

-Application software installed and executed normally.

•Hardware compatibility tests ran to completion without error.

•Test software suites executed successfully

-Test and data files were created in the correct directories without error.

-Files copied from client to server and back compare to the original with zero errors reported.

-Clients remain connected to the server system.

-Industry standard test suites run to completion with zero errors reported.

All Intel server board SE7525GP2 testing was performed using the Intel® Server Chassis SC5300 or Intel Server Chassis SC5275-E.

Revision 1.5 7