Intel HS-872P, half-size single board computer user manual System Configuration, Video Memory Setup

Page 38

HS-872P User’s Manual

System Configuration

Chapter 3 <System Configuration>

3.1 <Video Memory Setup>

Based on Intel® 945GM chipset with GMA (Graphic Media Accelerator) 950, the board supports Intel® DVMT (Dynamic Video Memory Technology) 3.0, which would allow the video memory to be allocated up to 224MB.

To support DVMT, you need to install the Intel GMA 950 Driver with supported OS.

BIOS Setup:

On-Chip Video Memory Size: This option combines three items below for setup.

On-Chip Frame Buffer Size:

This item can let you select video memory which been allocated for legacy VGA and SVGA graphics support and compatibility. The available option is 1MB and 8MB.

Fixed Memory Size:

This item can let you select a static amount of page-locked graphics memory which will be allocated during driver initialization. Once you select the memory amount, it will be no longer available for system memory.

DVMT Memory Size:

This item can let you select a maximum size of dynamic amount usage of video memory, the system would configure the video memory depends on your application, this item is strongly recommend to be selected as MAX DVMT.

38

Video Memory Setup

Image 38
Contents HS-872P HS-872P User’s Manual DisclaimerTrademark Cable Kit Packing ListHardware Printed MattersJumper Reference CPU and Memory Setup Index10 PS/2 Keyboard & Mouse Port Video Memory SetupBios Auto Flash Tool Introduction Product OverviewMulti-I/O Port Product SpecificationHS-872P User’s ManualIntroduction VGA Display InterfaceISA Interface Power and EnvironmentSolid State Disk Interface Audio InterfaceMechanical Drawing Block Diagram Intel Yonah ProcessorHS-872P User’s Manual This Page is Left for Blank HS-872P User’s Manual Hardware Setup Hardware SetupConnector Location PS2 Connector Function Remark Connector ReferenceConnector Function RemarkJumper Reference Jumper FunctionCPU & Memory Setup CPU and Memory SetupCPU Setup HS-872P User’s Manual Hardware Setup Memory Setup Cmos Setup Cmos SetupJrtc Mode Jumper Jrtc Type Onboard 3-pin jumperEnhanced IDE Interface Serial ATA interface LAN InterfaceOnboard Display Interface Onboard Display InterfaceAnalog VGA Interface Digital Display Digital DisplayPin Description Connector model Hirose DF13-40DP-1.25VPin Signal LCD Installation Guide Preparing the HS-872P,LCD panel and the backlight inverterDVI Interface DVI InterfacePin Number Assignment 4TV-out Interface TV-out InterfaceYPrPb Component Cable For Hdtv Bits Single channel Bios panel type selection formBits Single channel Bits Dual channel Output format Onboard Audio Interface Connector CnaudioOnboard Audio Interface USB2.0 Interface 11 USB2.0 InterfaceInterface USB2.0 Irrx Serial Port Jumper Setting Serial Port Jumper SettingPower and Fan Installation Power and Fan InstallationPower connectors HS-872P User’s Manual Hardware Setup Fan Connectors Gpio Interface Gpio InterfaceSwitch and Indicator PINHS-872P User’s Manual This Page is Left for Blank System Configuration Video Memory SetupSystem On-Chip Fixed Total Memory Frame Graphic Buffer SizeBios Setup HS-872P User’s Manual Bios SetupHS-872P User’s Manual This Page is Left for Blank Serial ATA Port Appendix a I/O Port Pin AssignmentIDE Port IrDA Port Floppy PortSerial Port USB Port VGA PortLAN Port PinAT Keyboard Port 10 PS/2 Keyboard & Mouse PortHS-872P User’s Manual This Page is Left for Blank Bios Auto Flash Tool Appendix B Flash BiosHS-872P User’s Manual Flash Bios Flash MethodHS-872P User’s Manual System Resources Appendix C System ResourcesC1.I/O Port Address Map Port Address MapHS-872P User’s Manual System Resources Port Address Map C2.Memory Address Map Memory Address MapC3.System IRQ Resources System IRQ ResourcesTimeout Value Range Appendix D Watch Dog timer SettingHS-872P User’s Manual Watch Dog timer Setting Program SampleThis Page is Left for Blank Taiwan Commate Computer Inc HS-872P User’s Manual Contact Information