Important safety instructions

For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance from and prolong the life of the unit:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use with only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug having been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING – To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

The unit is of Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection.

The unit must be installed in a manner that makes disconnection of the mains plug from the mains socket outlet (or appliance connector from the rear of the unit) possible. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. Only use the mains cord supplied with this unit.

Please ensure there is ample ventilation. We recommend that you do not place the unit in an enclosed space; if you wish to place the unit on a shelf, use the top shelf to allow maximum ventilation. Do not put any objects on top of this unit. Do not situate it on a rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do not cover the ventilation grilles with items such as newspapers, tablecloths, curtains, etc.

This unit must not be used near water or exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit.

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the service literature relevant to this appliance.

WEEE symbol

The crossed-out wheeled bin is the European Union symbol for indicating separate collection for electrical and electronic equipment. This product contains electrical and electronic equipment which should be reused, recycled or recovered

and should not be disposed of with unsorted regular waste. Please return the unit or contact the authorised dealer from whom you purchased this product for more information.

CE mark

This product complies with European Low Voltage (2006/95/EC) and Electromagnetic Compatibility (89/336/EEC) Directives when used and installed according to this instruction manual. For continued compliance only Cambridge Audio accessories should be used with this product and servicing must be

referred to qualified service personnel.

C-Tick mark

This product meets the Australian Communications Authority’s Radio communications and EMC requirements.

Ross Test Stamp

This product meets Russian electronic safety approvals.

FCC regulations

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Re-orient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Azur 840W specifications

The Cambridge Audio Azur 840W is a high-performance power amplifier that exemplifies the cutting-edge technology and craftsmanship that the brand is known for. Designed to deliver a dynamic and engaging audio experience, the 840W is ideal for audiophiles who demand excellence in sound reproduction.

One of the standout features of the 840W is its robust construction. The amplifier is housed in a solid chassis that minimizes unwanted vibrations, ensuring that the sound remains clear and uncolored. Its sleek design not only adds elegance to any audio setup but also incorporates functional elements that enhance performance.

The Azur 840W boasts an impressive power output of 200 watts per channel at 8 ohms, and this doubles to 400 watts per channel at 4 ohms. This high power output allows for the amplification of even the most demanding speakers, delivering a controlled and powerful soundstage. The advanced toroidal transformer design ensures high efficiency and low levels of distortion, which is crucial for maintaining audio fidelity.

Cambridge Audio incorporates innovative technologies such as the Class XD amplification in the 840W. This hybrid technology combines the efficiency of Class D amplification with the sonic qualities of Class A/B design. As a result, users benefit from a clean and detailed sound with minimal distortion, allowing them to experience their music as intended by the artists.

The amplifier features a fully balanced design, including balanced XLR inputs that reduce noise and interference, especially in longer cable runs. This enables users to connect high-quality sources without compromising audio integrity. Additionally, the speaker outputs are designed to accommodate various types of speaker configurations, providing flexibility in setup.

Another notable characteristic of the Azur 840W is its thermal management system. The amplifier uses an efficient heat sink design along with a refined ventilation system that helps keep operating temperatures low, thereby extending the lifespan of the components and ensuring reliable performance during prolonged listening sessions.

The 840W is also easy to integrate into existing systems, thanks to its smart design. The front panel incorporates an informative display and intuitive controls, making it user-friendly.

In summary, the Cambridge Audio Azur 840W is a powerhouse that delivers exceptional performance with advanced technology, making it a standout choice for those seeking high-fidelity audio amplification. With its robust build, innovative Class XD technology, and versatile connectivity options, the Azur 840W is well-equipped to elevate any audio experience.