Intel MS-1032 manual Explosive Device Proximity Warning Antenna Warning, Use On Aircraft Caution

Page 11

M645

Preface

The use of wireless devices on airplanes is governed by the Federal Aviation

Administration (FAA).

The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.

Antenna use:

In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.

Explosive Device Proximity Warning

Warning: Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use.

Antenna Warning

Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended for Intel® PRO/Wireless Network Connections installed in a desktop or portable computer, that the antenna for this device be installed so as to provide a separation distance of al least 20 cm (8 inches) from all persons and that the antenna must not be co-located or operating in conjunction with any other antenna or radio transmitter. It is recommended that the user limit exposure time if the antenna is positioned closer than 20 cm (8 inches).

Use On Aircraft Caution

Caution: Regulations of the FCC and FAA prohibit airborne operation of

XI

Image 11
Contents Prefeace FCC-B Radio Frequency Interference Statement Regulations InformationFCC Conditions Safety Guideline for Using Lithium Battery CD-ROM Drive Notice Translated Statements of Compliance Wireless LAN NoticeDeclaration of Conformity MiniPCI Adapter European Union CE Marking and Compliance NoticesVII Viii France GeneralBelgium United States USA and Canada Safety Requirements and NoticesUse On Aircraft Caution Explosive Device Proximity Warning Antenna WarningOther Wireless Devices FCC Rules and Regulations Part Underwriters Laboratories Inc. UL Regulatory Warning Macrovision NoticeSafety Instructions Version Revision Note Date First Release May TrademarksRelease History Technical Support Copyright NoticeIntroductions Table of ContentPreface M645 Installing the PC card Removing the PC card Prefeace Chapter Getting Started Customizing this Notebook Bios setupM645 General Introductions How to Use This ManualM645 General Introductions Unpacking These accessories listed above may change without noticeChapter General Introductions Chapter Customizing this Notebook Bios setupCPU SpecificationStorage Pcmcia Others Top-open View Product OverviewDisplay Panel Power Button and Quick Launch ButtonCover Latch Internal View Rubber PadsCover Latch External View Volume Increase-Decrease ControllerFront View Media Player Quick Launch ButtonIeee Audio Port ConnectorsPC Card Slot Right-side ViewUSB Ports Video Connector1 Card Reader VentilatorOptical Storage Device Power ConnectorLeft-side View Stereo SpeakerRJ-11 Connector RJ-45 ConnectorKensington Lock Hole Battery Pack Rear ViewRear View Mini PCI, Memory, CPU Compartment Bottom ViewHDD Compartment Battery PackBattery Release Button AC Adapter Power ManagementConnecting the AC Power Disconnecting the AC Power Releasing the Battery Pack Battery PackGetting Started Replacing the Battery Pack Conserving Battery Power Using the Battery PackBattery Safety Tips Charging the Battery Pack Basic Operations Safety and Comfort TipsHave a Good Work Habit Knowing the Keyboard Typewriter Keys Typewriter KeysCursor Keys Cursor KeysM645 Getting Started Fn Key Numeric KeysFunction Keys Windows KeysM645 Right Button Knowing the TouchpadCursor Movement Area Left ButtonDrag and Drop Using the TouchpadPositioning and Moving Point and ClickConfiguring the Touchpad Using the TouchpadMouse Properties Window About Hard Disk Drive Using the Optical Storage Eject Button Inserting the CDRemoving the CD Changing the Resolution and Colors Quality Using the Video FunctionConfiguring the Display Settings Check this option Volume Control Using the Audio FunctionConnecting Audio Devices Chapter General Introductions Getting Started Prefeace ChapterLAN Connecting the External DevicesConnecting the Keyboard Connecting the Peripheral DevicesConnecting the Mouse Connecting the External Monitor or TV Connecting the WebCamConnecting the Printer Connecting the Ieee Using the Modem Connecting the Communication DevicesUsing the LAN Installing the PC card PC Card InstallationRemoving the PC card Eject ButtonSelect Safely Remove HardwareM645 Customizing this Notebook Bios setup How to Run Bios Setup? About Bios SetupWhen to Use Bios Setup? Control Keys Bios Setup Menu Share Memory Main menuSystem Overview System Date System TimeLegacy USB Support Advanced SettingsAdvanced menu Primary IDE Master/SlaveIntel R SpeedStep tm tech Security menu Security SettingsChange Supervisor/User Password About Supervisor Password and User Password Enabled 1st, 2nd and 3rd Boot Device Setting Boot menuQuiet Boot Discard Changes and Exit Load Optimal DefaultsExit menu Save Changes and Exit

M645 Preface, G52-B1032X1, MS-1032 specifications

The Intel MS-1032, specifically the G52-B1032X1 and M645 configurations, represents a significant advancement in computing technology, combining performance, efficiency, and versatility. As a product designed to meet diverse user needs, it’s built with cutting-edge features and characteristics that cater to both professional and personal use.

One of the standout features of the MS-1032 is its powerful Intel processor, which enables high-speed processing and multitasking capabilities. With multiple cores and threads, users can expect seamless performance whether they are running intensive applications, engaging in gaming, or managing complex data sets. The integration of Intel's latest architecture enhances the overall efficiency, allowing the system to handle demanding tasks with ease.

The G52-B1032X1 variant is particularly notable for its graphical performance. Equipped with Intel's advanced integrated graphics, it provides a smooth visual experience, making it suitable for multimedia applications and casual gaming. This feature ensures that users can enjoy high-definition content without the need for additional graphic cards, thus reducing overall system costs and power consumption.

On the other hand, the M645 configuration emphasizes mobility and portability. It is designed with a lightweight chassis and robust battery life, facilitating productivity on the go. Equipped with rapid charging technology, it allows users to maintain workflow without frequent interruptions for charging, making it ideal for professionals who require a reliable machine during travel.

Connectivity is another critical aspect of the MS-1032 models. With built-in Wi-Fi 6 capabilities, users can experience faster internet speeds and improved network efficiency, which is particularly beneficial in environments with multiple connected devices. Additionally, a variety of ports, including USB 3.2 and HDMI, provide ample options for peripheral connections, enhancing the overall user experience.

Moreover, Intel's commitment to security is embodied in the MS-1032, featuring built-in security technologies such as Intel Hardware Shield and TPM support. These technologies work together to protect user data and provide a secure computing environment, a vital consideration in today's digital landscape.

In conclusion, the Intel MS-1032, particularly through the G52-B1032X1 and M645 models, exemplifies modern computing excellence. With its blend of robustness, mobility, and security, it caters to a wide array of users, from gamers to professionals. This system stands out as an exceptional choice, driven by Intel's innovative technology and user-centric design.