Intel CV700A 4-6Advanced Chipset Features, 4-6-1DRAM Clock/Drive Control, Item Help Menu Level >>

4-6 Advanced Chipset Features

The Advanced Chipset Features Setup option is used to change the values of the chipset registers. These registers control most of the system options in the computer.

Phoenix- AwardBIOS CMOS Setup Utility

Advanced Chipset Features

DRAM Clock/Drive Control	[Press Enter]
AGP & P2P Bridge Control	[Press Enter]
Memory Hole	[Disabled]
System BIOS Cacheable	[Enabled]
Video RAM Cacheable	[Disabled]

Item Help

Menu Level >>

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

4-6-1 DRAM Clock/Drive Control

Phoenix- AwardBIOS CMOS Setup Utility

DRAM Clock/Drive Control
Current FSB Frequency	100 MHz
Current DRAM Frequency	266 MHz	Item Help
DRAM Clock	[By SPD]
DRAM Timing	[Auto By SPD]
X SDRAM CAS Latency [DDR / DDR 2.5 / 4
X Bank Interleave	Disabled
x Precharge to Active <Trp>	4T	Menu Level >>
x Active to Precharge <Tras>	07T
x Active to CMD <Trcd>	4T
x REF toACT / REF (Trfc)	21T
X ACT(0) to ACT(1) (TRRD)	3T
Read to Precharge (Trtp)	[2T]
Write to Read CMD (Twtr)	[1T/2T]
Write Recovery Time (Twr)	[4T]
DRAM Command Rate	[2T Command]
RDSAIT mode	[Auto]
x RDSAIT selection	03

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

The menu is to include settings for the chipset dependents features.These features are related to system performance. Make sure you fully understand the items contained in this menu before you change anything. You may change the parameter settings to improve system performance. However, it may make your system unstable if the setting is not correct for your system configuration.

40