Intel LXD970A Demo Board for 10/100 Power Supply Option, Test Points, Test Point Descriptions

Page 9

Demo Board for 10/100 and 100BASE-FX Applications — LXD970A

2.3Power Supply Option

The LXD970A includes a jumper (JP8), which provides a an optional power supply source for the VCC pins; VCCA (analog supply), VCCR (receive supply), VCCT (transmit supply) and VCCD (digital supply). In the original factory configuration, this jumper is shorted by a circuit trace and all LXD970A power is supplied via the MII pin (J1). However, the circuit trace can be easily cut to provide the JP8 isolation option.

2.3.1External +5V Supply for Analog Circuitry (VCCA, VCCT and VCCR)

To provide an external +5V power supply for the LXD970A analog circuitry, proceed as follows:

•Cut the circuit trace across JP8 pins 3 and 4

•Attach an external +5V supply to JP8 pin 3

This routes the external supply to VCCA, VCCT, and VCCR (all circuits except VCCD and VCCIO). To restore to factory configuration, disconnect the external power supply and install the jumper block in JP8.

2.4Test Points

There are 9 Test Points on the LXD970A Demo Board. Table 1 describes these.

Table 1. Test Point Descriptions

Label

 

Ref Des

Description

 

 

 

 

TD+

 

J3

Transmit Data Output Positive - Signals transmitted from LXD970A to TP link.

 

 

 

 

 

TD-

 

 

J4

Transmit Data Output Negative - Signal transmitted from LXD970A to TP link.

 

 

 

 

RD+

 

J5

Receive Data Input Positive - Signals received from TP network.

 

 

 

 

RD-

 

J6

Receive Data Input Negative - Signals received from TP network.

 

 

 

 

GNDA

 

J8

Analog Ground

 

 

 

 

TSTON

 

J9

Test Output Negative 1

TSTOP

 

J10

Test Output Positive 1

IBTST

 

J11

IB Test 1

MDINT

 

J12

Management Data Interrupt 2 - Indicates status change.

1. Factory Test Only

 

 

2. 4.7kΩ

pull-up to VCC needed if used

 

 

 

 

 

Development Kit Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Development Kit Manual LXD970A Demo Board for 10/100 and 100BASE-FX ApplicationsPage Contents Page General Description FeaturesMII LXD970A Demo BoardTest Setup Equipment and SetupLoading Test File Optional Test SetupTest Points Power Supply OptionTest Point Descriptions Label Ref Des DescriptionJumpers Jumper DescriptionsFunction MF Pins Input Voltage Levels Multi-Function PinsParameter Symbol Min Max Units Hardware Control InterfaceIf Auto-Negotiate Enabled via MF0 Operating Speed Advertisement SettingsHardware Control Interface JP1 Functions Address Input Voltage Levels2 PinLED Indicators Additional JP1 Jumper FunctionsLED Descriptions LXD970A Schematic

LXD970A Demo Board for 10/100, LXD970A specifications

The Intel LXD970A and the LXD970A Demo Board represent significant advancements in networking technology, designed to provide efficient solutions for both developers and engineers looking to implement 10/100 Mbps networking solutions. These products serve as an excellent choice for various applications, including embedded systems, industrial automation, and networking equipment.

At the core of the LXD970A is its robust support for both 10BASE-T and 100BASE-TX Ethernet standards, allowing users to seamlessly integrate into existing networks while also supporting higher bandwidth requirements. This dual capability not only enhances flexibility but also ensures compatibility with a wide range of legacy and modern devices.

One of the key features of the LXD970A is its advanced integrated design, featuring a built-in media access control (MAC) layer, which streamlines the overall design by reducing the need for additional components. This integration results in lower power consumption, which is crucial for battery-powered applications as well as environmentally conscious designs.

The LXD970A Demo Board acts as a comprehensive platform for developers. With easy access to all the necessary interfaces, including GPIO (General Purpose Input/Output) and a simple Ethernet connector, the demo board provides an out-of-the-box experience, enabling users to test and develop applications rapidly. Comprehensive documentation and sample code assist in accelerating the development process.

Moreover, with a focus on security, the LXD970A supports various protocols and features designed to protect data integrity and prevent unauthorized access. This is particularly important for applications that handle sensitive information across networks.

The Intel LXD970A also supports Automatic MDI/MDI-X crossover detection, eliminating the need for crossover cables and simplifying the network setup. This feature enhances ease of use and makes it suitable for various networking environments, ensuring that installations are trouble-free and efficient.

In addition to its technical specifications, the LXD970A is also designed with durability in mind, making it suitable for industrial environments where rugged performance is essential. Its operational temperature range and reliability standards are tailored to meet the demands of harsh conditions often found in industrial applications.

Overall, the Intel LXD970A and its accompanying demo board are invaluable tools for developers and engineers seeking to leverage the benefits of high-speed networking while maintaining flexibility and compatibility across a broad spectrum of devices and applications. With its blend of advanced features, low power design, and extensive support, the LXD970A stands out as a significant asset in the toolkit of any networking professional.
Top Page Image Contents