CHAPTER 2 | HARDWARE INSTALLATION |
|
|
2.5-1 Power Switch
Connect to a
2.5-2 Reset Switch
Reset switch is used to reboot the system rather than turning the power ON/ OFF. Avoid rebooting while the HDD LED is lit. You can connect the Reset switch from the system case to this pin.
2.5-3 Keylock
Keylock allows you to disable the keyboard for security purposes. You can connect the keylock to this pin.
2.5-4 Power LED
The Power LED is always lit while the system power is on. You can connect the Power LED from the system case to this pin.
2.5-6 Speaker
Speaker from the system case is connected to this pin.
If
Short pin
Open pin
2.5-7 HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power off while the HDD led is lit. You can connect the HDD LED from the system case to this pin.