Cambridge Audio 340A SE user manual Loudspeaker terminals, AC power socket

Page 7

340A/340A SE Integrated amplifier

4Loudspeaker terminals

Two sets of loudspeaker terminals are available, A (main loudspeaker terminals) and B (secondary switchable loudspeaker terminals). Connect the wires from your left channel loudspeaker to the LEFT + & - terminals, and the wires from the right channel loudspeaker to the RIGHT + & - terminals. In each case, the red terminal is the positive output and the black terminal is the negative output.

Care should be taken to ensure no stray strands of wire are shorting speaker outputs together. Please ensure that the loudspeaker terminals have been tightened adequately to provide a good electrical connection. It is possible for the sound quality to be affected if the screw terminals are loose.

Note: When using one pair of speakers, use speakers with a nominal impedance of between 4-8 ohms. When using two pairs of speakers, use speakers with a nominal impedance of between 6-8 ohms each.

5AC power socket

Once you have completed all connections to the amplifier, plug the AC power cable into an appropriate mains socket. Your amplifier is now ready for use.

Azur integrated amplifier 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Azur 340A/340A SE Contents Introduction 340A/340A SE Integrated amplifierChecking the Power Supply Rating Safety PrecautionsPlug Fitting Instructions UK Only Important Safety Instructions Tape Rear Panel ConnectionsAux, CD, Tuner/DAB, DVD, AV/MD Record OutLoudspeaker terminals AC power socketTape connection ConnectingBasic connection Azur 340A Integrated Amplifier Speaker B connectionsPhones PowerFront Panel Controls Auxillary MP3 In 340A SE onlyInfrared sensor VolumeDirect Bass and TrebleRemote Control DC offset protection Over temperature detectionProtection System Overload and Short-Circuit ProtectionTroubleshooting 340A 340A SE Technical SpecificationsLimited Warranty 340A/340A SE Integrated amplifier Azur 340A/340A SE
Top Page Image Contents