Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Substance | Proposed Maximum | Actual | |
Concentration | Concentration | ||
| |||
Lead (Pb) | 0,1% | < 0,1% | |
|
|
| |
Mercury (Hg) | 0,1% | < 0,1% | |
Cadmium (Cd) | 0,01% | < 0,01% | |
|
|
| |
Hexavalent Chromium (Cr6+) | 0,1% | < 0,1% | |
Polybrominated biphenyls (PBB) | 0,1% | < 0,1% | |
|
|
| |
Polybrominated diphenyl ethers (PBDE) | 0,1% | < 0,1% | |
|
|
|
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1.Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.
2.Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).
3.Lead in high temperature type solders (i.e.
4.Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic VNB108 | iii |