JBL E250P manual Specifications, E150P

SPECIFICATIONS

E150P

Amplifier

Power (RMS): 150 Watts

Peak Dynamic

Power†: 250 Watts

Driver: 10" PolyPlas™

Inputs: Line Level (switchable to LFE) and Speaker Level with 5-way binding posts

Low-Pass

Frequency: Variable from 50Hz to 150Hz

Frequency

Response: 27Hz – Low-pass crossover setting

Dimensions

(H x W x D): 17-3/4" x 12-1/4" x 14-1/2" (451mm x 311mm x 368mm)

Weight: 33.5 lb/15.2kg

E250P

250 Watts

550Watts 12" PolyPlas™

Line Level (switchable to LFE) and Speaker Level with 5-way binding posts

Variable from 50Hz to 150Hz

25Hz – Low-pass crossover setting

19-3/4" x 14-3/8" x 16-1/2" (502mm x 365mm x 419mm)

43 lb/19.5kg

†The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.

PRO SOUND COMES HOME™

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 8500 Balboa Boulevard, Northridge, CA 91329

www.jbl.com

© 2003 Harman International Industries, Incorporated

JBL is a registered trademark of Harman International Industries, Incorporated.

Part No. 350883-001

*Trademarks of Dolby Laboratories.

DTS is a registered trademark of Digital Theater Systems, Inc.

All features and specifications are subject to change without notice.