SPECIFICATIONS
This section provides technical information about the LT170 Projector's performance
Model Number | LT170 |
Optical |
|
DMD | Single Chip Digital Micromirror Device (DMD) |
Resolution | 1024×768 pixels native*, up to UXGA with Advanced AccuBlend |
Lens | Manual zoom and focus: F=2.0 |
Lamp | 145W |
Image Size | 30 - 200 inches (0.8 - 5.1 m) diagonal |
Projection Distance | 3.51 - 26.67 ft / 1.07 (Wide) - 8.13 m (Tele) |
Projection Angle | Tele : 8.6°/ Wide : 9.5° |
Keystone Correction | +/- 30 degrees electronic (auto) |
Electrical |
|
Inputs | 1 RGB/Component |
Video Compatibility | NTSC, NTSC4.43, PAL, |
Scan Rate | Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz |
Video Bandwidth | RGB: 100 MHz |
Color Reproduction | 16.7 million colors simultaneously, Full color |
Horizontal Resolution | NTSC / |
| SECAM: 300 TV lines |
| YCbCr: 540 TV lines |
| RGB: 1024 dots (H)×768 dots (V) |
External Control | RS232, IR |
Sync Compatibility | Separate Sync / Composite Sync / Sync on G |
0.5W (monaural) | |
Power Requirement | 100 - 240V AC, 50 / 60 Hz |
Input Current | 2A (Max.) |
Power Consumption | 196W(4W in Standby mode) |
Mechanical |
|
Installation Orientation | Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear |
Dimensions | 4.8" (W)×3.3" (H)×11.0" (D) |
| 123mm (W)×85mm (H)×280mm (D) |
| (not including protrusions) |
Net Weight | 3.9 lbs / 1.8 kg |
Environmental Considerations |
|
| Operational Temperatures : 41° to 95°F (5° to 35°C), 20% to 80% humidity |
| Storage Temperatures : 14° to 122°F |
Regulations | UL Approved (UL 60950, CSA 60950) |
| Meets DOC Canada Class B requirements |
| Meets FCC Class B requirements |
| Meets AS/NZS CISPR 22 Class B |
| Meets EMC Directive (EN55022:1998, |
| Meets Low Voltage Directive (EN60950, TUV GS Approved) |
For additional information visit:
US : http://www.necvisualsystems.com
Europe :
Global :
* Effective pixels are more than 99.99%.
The specifications are subject to change without notice.