ViewSonic VA1703w-2 manual Wall Mounting Optional

Page 9

Wall Mounting (Optional)

To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following:

Four VESA screw holes

1.Verify that the Power button is turned Off, then disconnect the power cord.

2.Lay the LCD display face down on a towel or blanket.

3.Remove the Plastic Covers from the back of the LCD display.

4.Remove the four screws attaching the base.

5.Remove the Rubber Plugs from inside the four VESA screw holes.

6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).

7.Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

ViewSonic VA1703w/VA1703wb

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents ViewSonic Contents For U.S.A Compliance InformationFor Canada CE Conformity for European CountriesImportant Safety Instructions Declaration of RoHS Compliance Copyright Information Product Registration For Your RecordsProduct disposal at end of product life Package Contents PrecautionsGetting Started Turn on LCD display and computer Quick InstallationWall Mounting Optional Using the LCD Display Setting the Timing ModeOSD and Power Lock Settings Front Control Panel Adjusting the Screen ImageFollowing tips may help you optimize your display Do the following to adjust the display settingMain Menu Controls ViewSonic VA1703w/VA1703wb ViewSonic VA1703w/VA1703wb Other Information SpecificationsNo power TroubleshootingPower is on but no screen image Wrong or abnormal colors= FAX Customer SupportTo clean the screen Cleaning the LCD DisplayTo clean the case DisclaimerViewsonic LCD Display Limited Warranty
Top Page Image Contents