ViewSonic VA521 manual Installation of Wall Mount Optional

Page 8

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your

LCD display from a desk-mounted to a wall-mounted display, do the following:

Four screw holes

Mounted on the wall

1Disconnect Power.

2Push the LCD display back and down flat against the base as shown.

3Lay the LCD display face down on

a towel or blanket. Notice the four screw holes on the rear cover.

4Attach the mounting bracket from the VESA compatible wall- mounting kit (75 mm x 75 mm distance).

5Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

ViewSonic VA521

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ViewSonic Content ViewSonic VA521Compliance Information For U.S.AFCC Warning For CanadaImportant Safety Instructions Product Registration For Your Records Product disposal at end of product lifePackage Contents PrecautionsQuick Installation Connect power cord Connect video cableInstallation of Wall Mount Optional Setting the Timing Mode OSD and Power Button Lock ModesAdjusting the Screen Image Front Control PanelDo the following to adjust the screen image Main Menu Controls Control ExplanationImage Adjust OSD Control Explanation Specifications Other InformationTroubleshooting No powerPower is on but no screen image Wrong or abnormal colorsCustomer Support = FAXCleaning the LCD Display To clean the screenTo clean the case DisclaimerLimited Warranty Viewsonic LCD Display
Top Page Image Contents