Using the LCD Display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; example 75 Hz). After setting the timing mode, use the OnView® controls to adjust the screen image.
For the best picture quality set your LCD display timing mode to:
VESA 1280 x 1024 @ 60Hz.
To set the Timing Mode:
1Set the resolution:
2Set the refresh rate: See your graphic card's user guide for instructions.
WARNING: Do not set the graphics card in your computer to exceed the maximum refresh rate of 75Hz; doing so may result in permanent damage to your LCD display.
OSD and Power Lock Settings
You can lock the On Screen Displays (OSDs) and/or the power button to prevent unwanted changes to the current image settings.
• | OSD LOCK: Press and hold the [1] and [▲] buttons on the face of the |
| monitor for 10 seconds. The message OSD LOCK will then display briefly |
| indicating that the OSD image settings are now locked. |
• | OSD UNLOCK: Press and hold the [1] and [▲] buttons again for 10 |
| seconds. The message OSD UNLOCK will then display briefly indicating |
| that the OSD image settings are now unlocked. |
•POWER BUTTON LOCK: Press and hold [1] and the down arrow ▼ for 10 seconds. If the power button is pressed the message Power Button Locked will display for 5 seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored.
•POWER BUTTON UNLOCK: Press and hold [1] and the down arrow ▼ again for 10 seconds.
ViewSonic VG900 _VG900 b 6