Do the following to adjust the screen image:
1To display the Main Menu, press button [1].
NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 13.
2To highlight a control you want to adjust, press ▲ or ▼ to scroll up or down the Main Menu.
3To select the highlighted control, press button [2]. A control screen appears like the one shown below for the selected control.
4To adjust the selected control, press the up ▲ or down ▼ buttons on the Front Control Panel of the monitor.
5To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
•Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60Hz to the VG191/VG191b. (Look for instructions on “changing the refresh rate” in your graphic card's user guide.)
•If necessary, make small adjustments using H POSITION and V POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the ViewPanel®.)
•Adjust FINE TUNE so that the screen image looks focused, crisp, and sharp.
NOTE: Auto Image Adjust and Manual Image adjust are inactive for digital mode.
ViewSonic | VG191/VG191b | 9 |