ViewSonic VP2000S manual Installation of Wall Mount Optional

Page 7

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your

LCD display from a desk-mounted to a wall-mounted display, do the following:

Remove

four screws

1Disconnect Power.

2Lay the LCD display face down on a towel or blanket.

3Pull the back plate away from the head of the LCD display. Let the plate hang on the neck of the LCD display as shown on the left. Notice the four screws.

4Remove the four screws from the back plate.

5Attach the mounting bracket from the VESA compatible wall- mounting kit (100 mm x 100 mm distance).

6Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

ViewSonic VP2000s 6

Image 7

Contents VP2000s LCD Display Contents Product disposal at end of product life For Your RecordsPrecautions Package ContentsGetting Started Insert the ViewSonic Wizard CD into the computer’s CD drive Quick InstallationConnect power cord Connect video cable Turn on LCD Display and computerLandscape/Portrait Modes Installation of Wall Mount Optional OSD and Power Lock Settings Setting the Timing ModeFront Control Panel shown below in detail Adjusting the Screen ImageFollowing tips may help you optimize your display Do the following to adjust the screen imageControl Explanation Main Menu ControlsControl Explanation Control Explanation Control Explanation Other Information SpecificationsWrong or abnormal colors TroubleshootingNo power Power is on but no screen imageCountry Web site = Telephone Region Customer SupportDisclaimer Cleaning the LCD DisplayTo clean the screen To clean the caseViewsonic LCD Display Limited WarrantyFor European Countries Safety GuidelinesAppendix For the United States and CanadaCE Conformity for Europe Compliance Information for U.S.AViewSonic Corporation