Wall Mounting (Optional)
To obtain a
Four VESA screw holes
1.Verify that the Power button is turned Off, then disconnect the power cord.
2.Lay the LCD display face down on a towel or blanket.
3.Remove the Plastic Covers from the back of the LCD display.
4.Remove the four screws attaching the base.
5.Remove the Rubber Plugs from inside the four VESA screw holes.
6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).
7.Attach the LCD display to the wall, following the instructions in the
To Raise and Lower the display
You can easily raise and lower the display panel (the head) manually. As you face the front of the display, take hold of each side of the head and pull up or down. The panel should move easily.
ViewSonic VG930m | 7 |