ViewSonic VP171S, VP171b manual Quick Installation

Quick Installation

1 Connect power cord and AC/DC	4 Wizard CD (continued)
adapter	(1) Wait for the CD-ROM to auto-start.
2 Connect video cable	NOTE: If the CD-ROM does not auto-start:
• Make sure both the LCD display	double-click on the CD-ROM icon in the
	Windows Explorer, then double-click on
and computer are turned OFF
	viewsonic.exe.
• Remove rear panel covers if necessary
	(2) Follow the on-screen instructions.
• Connect the video cable from the LCD
display to the computer	5 Windows users: Set the timing
Macintosh users: Models older than G3	mode (resolution and refresh
require a Macintosh adapter. Attach the	rate)
adapter to the computer and plug the video
	Example: 1280 x 1024 @ 60 Hz.
cable into the adapter.
To order a ViewSonic® Macintosh adapter,	For instructions on changing the resolution
contact ViewSonic Customer Support.	and refresh rate, see the graphic card’s user
3 Turn ON LCD Display and	guide.
	Installation is complete. Enjoy your new
computer
	ViewSonic, LCD display.
Turn ON the LCD display, then turn
	To be best prepared for any future customer
ON the computer. This sequence (LCD display
	service needs: print this user guide and write
before computer) is important.
	the serial number in “For Your Records” on
NOTE: Windows users may receive a
	page 2. (See back of LCD display.)
message asking them to install the INF file.	You can register your product online at the
This is on the CD.
	website for your region. See the Customer
4 Insert the ViewSonic Wizard CD
	Support table in this guide.
into the computer’s CD drive.	The ViewSonic Wizard CD-ROM also
Follow the on-screen instructions.	provides an opportunity for you to print the
If your computer does not have a CD-ROM	registration form which you may mail or fax
	to ViewSonic.
drive, see “Customer Support.”

DVI-D
D-SUB 2	AC IN
D-SUB 1	Power Switch

Power cord

AC outlet	Computer
(wall socket)
	power cord

ViewSonic VP171/VP171b/VP171s 4