ViewSonic VA2333-LED, VA2333M-LED warranty Setting the Timing Mode, OSD and Power Lock Settings

Page 10

Using the LCD Display

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1920 x 1080) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image.

For the best picture quality set your LCD display timing mode to:

VESA 1920 x 1080 @ 60Hz.

To set the Timing Mode:

1.Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the resolution.

2.Set the refresh rate: See your graphic card's user guide for instructions.

WARNING: Do not set the graphics card in your computer to exceed the maximum refresh rate of 75Hz; doing so may result in permanent damage to your LCD display.

OSD and Power Lock Settings

OSD Lock: Press and hold [1] and the up arrow S for 10 seconds. If any buttons are pressed the message OSD Locked will display for 3 seconds.

OSD Unlock: Press and hold [1] and the up arrow S again for 10 seconds.

Power Button Lock: Press and hold [1] and the down arrow T for 10 seconds. If the power button is pressed the message Power Button Locked will display for 3 seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored.

Power Button Unlock: Press and hold [1] and the down arrow T again for 10 seconds.

ViewSonic VA2333-LED/VA2333m-LED

8

Image 10
Contents ViewSonic VA2333-LED/VA2333m-LED LCD DisplayContents For U.S.A Compliance InformationFor Canada Important Safety Instructions Declaration of RoHS Compliance Product Registration For Your Records Copyright InformationProduct disposal at end of product life Package Contents PrecautionsTurn on LCD display and computer Quick InstallationInsert the ViewSonic Wizard CD into the computer’s CD drive Four Vesa screw holes Four screws attaching the base OSD and Power Lock Settings Setting the Timing ModeVesa 1920 x 1080 @ 60Hz Adjusting the Screen Image VA2333m-LEDVA2333-LED Do the following to adjust the display setting Following tips may help you optimize your displayAudio Adjust For VA2333m-LED only Main Menu ControlsViewSonic VA2333-LED/VA2333m-LED ViewSonic VA2333-LED/VA2333m-LED ViewSonic VA2333-LED/VA2333m-LED Specifications Other InformationPower is on but no screen image TroubleshootingNo power Wrong or abnormal colorsCustomer Support = FAXTo clean the case Cleaning the LCD DisplayTo clean the screen DisclaimerLimited Warranty Effect of state law Exclusion of damagesSales outside the U.S.A. and Canada Mexico Limited Warranty Viewsonic Display ProductsMerida