ViewSonic VS12541 manual Troubleshooting

Page 38

Troubleshooting

No picture

•The signal cable should be completely connected to the display card/computer.

•The display card should be completely seated in its slot.

•Monitor and computer power should be switched ON.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

•If nothing is displayed on the screen when HDCP device is connected, reset the power of the device.

The Power button does not respond

• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image persistence

•Please be aware that LCD technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE:

As with all personal display devices, VIEWSONIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be completely attached to the computer.

•Use the OSD controls to focus and adjust display by increasing or decreasing the fine adjustment.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60 Hz refresh rate.

Image of component signal is greenish

• Check to see if the DVD/HD input connector is selected.

The LED on monitor is not lit (no green or red color can be seen)

•The power cord should be connected.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

Display image is not sized properly

•Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Sound

•Check to see if speaker cable is properly connected.

•Check to see if mute is activated.

•Check to see if volume is set at minimum.

Remote Control is not available

•Check the Remote Control’s batteries status.

•Check if batteries are inserted correctly.

•Check if the Remote Control is pointing at the monitor’s remote sensor.

Stripe Noise

Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or degradation.

ViewSonic CD4230

36

Page 37 Page 39
Image 38
Page 37 Page 39
Contents CD4230 LCD Commercial Monitor Content For U.S.A For CanadaImportant Safety Instructions Declaration of RoHS Compliance Copyright Information Safety Precautions Recommended UsePackage Contents Control Button Lock Function Parts Name and FunctionsControl Panel Terminal Panel Wireless Remote Control Handling the remote control Installing the Remote Control BatteriesOperating Range for the Remote Control Setup Procedure ConditionsHow to set-up How to Mount and Attach Options to the LCD Monitor Ventilation Requirements for enclosure mounting To avoid monitor from fallingBefore making connections Wiring DiagramConnections Connecting a Personal Computer Connect the LCD Monitor to a Personal ComputerConnecting with Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital OutputConnecting a DVD Player with component output Connect the LCD Monitor to a DVD PlayerConnecting a VCR with composite Cvbs and S-Video outputs Connect the LCD Monitor to a VCRConnecting to External Speakers Connect the LCD Monitor to External SpeakersUsing Power Management Power on and OFF ModesPower Indicator Basic OperationTo select a video source using the wireless remote control Picture ModeTo select a video source using the control panel Selecting a video sourceControl Panel Remote ControlOSD On-Screen-Display Controls Picture Mute VolumeSound Audio SourcePIP Picture in Picture OptionAspect ratio Video Source Auto AdjustmentPhase Clock FrequencyOverscan SettingLanguage ScheduleSchedule Set Monitor ID Power saveDisplay-Wall Image RetentionReset DiagnosticRecommendations For Long Life Use of Public DisplayImage Sticking of LCD Panel Controlling the LCD monitor via RS- 232C Remote Control ConnectionAppendix Installing stands How to install standsFlexible Display Wall Application FeaturesSignage-friendly Design Plug and PlayTroubleshooting Specifications Product SpecificationsVideo YPbPr Supported Input Signal ResolutionResolution Input source Customer Support Limited Warranty Mexico Limited Warranty Merida

VS12541 specifications

The ViewSonic VS12541 is a feature-rich display solution tailored for both business and educational environments. With its 12.5-inch screen size, it strikes a perfect balance between portability and visibility, making it an ideal option for presentations, classrooms, and collaborative settings.

One of the standout features of the VS12541 is its high-resolution display, which delivers crystal-clear visuals with vibrant colors. The sharp image quality enhances the viewing experience, ensuring that presentations and videos are engaging and easy to read. The display supports multi-touch technology, allowing multiple users to interact simultaneously, fostering collaboration and participation in group activities.

The VS12541 utilizes advanced LED backlight technology, which not only improves power efficiency but also enhances overall brightness and color accuracy. This technology supports a wide color gamut, ensuring that images and graphics appear vivid and lifelike, making it suitable for media-rich content.

Connectivity is another key aspect of the ViewSonic VS12541. The display comes equipped with multiple input options, including HDMI and USB ports, allowing seamless integration with various devices such as laptops, tablets, and other multimedia equipment. This versatility ensures that users can easily connect their devices without the hassle of additional adapters.

In terms of design, the VS12541 features a sleek and modern aesthetic that complements any environment. Its lightweight build ensures that it can be easily mounted on walls or used on desks, providing flexibility in setup. Additionally, the anti-glare screen minimizes reflections, making it suitable for well-lit spaces.

The ViewSonic VS12541 is also built with user-friendly features. It includes an intuitive interface for easy navigation and control of settings. Furthermore, it supports a range of operating systems, making it compatible with various platforms and applications.

To round out its offerings, the VS12541 is backed by ViewSonic's reputation for quality and reliability, with robust customer support and warranty options. This makes it a smart investment for organizations looking for a dependable display solution that enhances productivity and collaboration.

In summary, the ViewSonic VS12541 combines high-resolution visuals, advanced touch technology, versatile connectivity, and a sleek design to create a powerful display solution suitable for diverse applications in business and educational settings.
Top Page Image Contents