Voltage Selection And Fuses, Troubleshooting

Voltage Selection And Fuses

Changing Voltage

Your EON Sub G2 will typically be set at the factory to accommodate the power mains voltage in your area. Before you set up your EON Sub G2 for the first time it is a good idea to verify that the setting of the selector is appropriate for the power in your area. Directly below the IEC power con- nector you will see a seal that indicates the factory setting for the voltage. If the voltage indicated is correct for your area, go ahead and power up your EON Sub G2.

In the event that you do need to change the voltage:

•Make sure that the AC is disconnected from the speaker.

•Directly below the male IEC connector on the speaker is a voltage selector. Break the factory- applied seal.

•Set the voltage selector switch to the 115V or 230V setting as required for your area.

•After having reconfirmed that the correct voltage is selected, connect the AC (IEC connector) and power the unit up.

DO NOT UNDER ANY CIRCUMSTANCES OPERATE THE UNIT WITH THE WRONG VOLTAGE SELECTED. DOING SO MAY RESULT IN SERIOUS DAMAGE TO YOUR SPEAKER SYSTEM WHICH WILL NOT BE COVERED BY WARRANTY.

Fuse Replacement

The EON Sub G2 has no user-serviceable fuses. Failure of fuses is most frequently a symptom of problems requiring service by a competent technician.

	Troubleshooting

	Symptom	Likely Cause	What to do
	No sound	Speaker not connected to	Verify that speaker is connected
		active AC power.	and that the circuit is on.
		Power not switched on.	Switch on power and verify that
			power LED is on.
	No sound, speaker is	Speaker power cable is faulty	• Re-seat the power cable at both
	connected to working AC	or improperly connected.	ends.
	power but won’t come on.		• Substitute a known-good power
			cable.
		Blown fuse.	• There are no user-serviceable
			fuses in the EON SUB G2. Take
			your speaker to a competent
			servicer.
	No sound. Speaker comes	Signal source (mixer,	• Check VU meters on the source
	on. SIGNAL LED does not	instrument, etc.) is not	mixer.
	illuminate.	sending.	• Verify that the tape or CD is
			playing.
			• Use headphones to verify that
			the instrument is actually sending
			an audio signal.
		Faulty cables and	• Disconnect and re-seat signal
		connections.	cables.
			• Replace suspected cable with a
			known-good cable.
	Signal sounds distorted and	Excessive input signal, trying	• Reduce the output level of the
	very loud, PEAK light is lit	to exceed the capabilities	source.
	most of the time.	of the speakers.	• Turn down the LEVEL controls on
12			the speaker.
12			• Use additional EON speakers.
			• Use additional EON speakers.

EONSUB-G2 specifications

The JBL EONSUB-G2 is a powerful and versatile subwoofer designed to enhance live performances, DJ setups, and professional sound installations. Known for its exceptional sound quality, the EONSUB-G2 is a popular choice among audio professionals and enthusiasts alike. One of the standout features of this subwoofer is its robust construction. Built with a durable enclosure crafted from high-quality materials, the EONSUB-G2 is designed to withstand the rigors of regular use. It features a rugged, lightweight design that allows for easy transportation and setup, making it suitable for mobile applications.

The JBL EONSUB-G2 boasts a high-performance 15-inch woofers that deliver deep, resonant bass frequencies. This allows the subwoofer to provide a powerful low-end boost that significantly enhances music and sound clarity, making it ideal for genres that rely heavily on bass, such as electronic dance music and hip-hop. The built-in amplifier further contributes to its capabilities, offering an impressive power rating that ensures optimal performance, even in larger venues.

One of the defining characteristics of the EONSUB-G2 is its user-friendly controls. The subwoofer features a simple onboard mixer with independent volume controls for both the sub and full-range speakers. This flexibility allows sound engineers and users to easily adjust levels in real-time, ensuring a balanced audio output that meets the needs of the performance or event.

JBL has also integrated advanced technologies into the EONSUB-G2 to enhance its performance. The subwoofer incorporates a dynamic DSP (digital signal processing) that optimizes its output for various acoustic environments. This ensures that the sound remains consistent, accurate, and powerful, regardless of the setting. Additionally, the EONSUB-G2 is designed with multiple input options, allowing it to seamlessly integrate with a variety of audio sources and systems.

In terms of connectivity, the EONSUB-G2 is equipped with XLR and 1/4-inch TRS inputs, making it compatible with professional mixing consoles and audio interfaces. The versatility of this subwoofer means it can be used in various applications, from small gatherings to large events, providing a user-friendly yet professional-grade solution for bass reinforcement.

Overall, the JBL EONSUB-G2 subwoofer stands out in the market for its combination of sound quality, durability, and ease of use, making it a top choice for professionals seeking enhanced bass performance.