Stand Mounting and Precautions, Electrical Safety

•Keep the exterior of the speaker enclosure clean. Use a damp rag with a general-purpose household detergent. For grease and marking tape residue, use a damp cloth with isopropyl alcohol or mineral spirits and wipe dry. Do not use powerful solvents like acetone, MEK, lacquer thinner or 1,1,1-Trichloro-ethane (household cleaning fluid). These solvents will damage painted and co-polymer surfaces of your speakers.

•EON speakers are not intended for fixed installation in outdoor environments. Moisture can damage the speaker cone and surround, cause corrosion of electrical contacts, and create an electrical shock hazard. Protect your speakers from moisture. Avoid exposing the speakers to direct moisture. Any electrically powered device can produce dangerous shock hazards when wet or exposed to moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces will be degraded by long-term exposure to intense ultra-violet (UV) light.

•The EON Sub G2 contains no user serviceable parts. Refer servicing to an authorized JBL service agency.

Stand Mounting and Precautions

Your EON speakers include a 35mm receptacle cup to facilitate mounting on tripod stands. When using stands, be sure to observe the following precautions:

•EON speakers include a thumb-screw that can be tightened to lock the speaker to the tripod stand. Before mounting the speaker on the stand, be sure to loosen the screw so that it doesn’t prevent the pole from fully penetrating the socket.

•Check the stand specification to be certain it is designed to support the weight of the speaker (see specifications). Observe all safety precautions specified by the stand manufacturer.

•Always verify that the stand is placed on a flat, level, and stable surface.

•Route cables so that performers, production crew, and audience will not trip over them and pull the speaker over.

•Be sure to fully extend the legs of tripod type stands.

•Position the stand so that the legs do not present a trip hazard.

•Do not attempt to place more than one speaker on a stand designed for a single speaker.

•Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e. sandbags) on the base of the stand to improve stability.

The EON Sub G2 generates considerable energy. When placed on a slippery surface such as polished wood or linoleum, the EON Sub G2 may move due to its acoustical energy output. Precautions should be taken to assure that the speaker does not fall off a stage or table on which it is placed. One solution is to place the speaker on a rubber mat.

Electrical Safety

All EON powered series speakers are fitted with a detachable power cord (supplied) which connects to the AC mains on the back panel of the loudspeaker. The power cord has an IEC female connector on one end and a male mains connector on the other end. This cord is supplied to accommodate the different worldwide safety and electrical code requirements. If the power cord supplied with your EON product has a 3-pin type plug do not cut off or damage the grounding plug. Like any electrical appliance, your EON powered speakers should not be used in water or when wet.

EON Sub G2 specifications

The JBL EON Sub G2 is a powerful and versatile subwoofer designed to deliver deep, impactful bass while ensuring excellent sound clarity. This subwoofer is part of JBL's renowned EON series, which has gained a reputation among musicians, DJs, and events for its high-quality audio performance and portability.

One of the standout features of the JBL EON Sub G2 is its innovative design. It boasts a robust and lightweight cabinet made from high-density composite material, which makes it durable yet easy to transport. The subwoofer also includes built-in handles for convenient mobility. This makes it an excellent choice for both permanent installations and mobile applications, where ease of setup is essential.

The EON Sub G2 is equipped with a powerful 15-inch woofer, designed to produce low-frequency sounds with exceptional clarity and punch. The woofer is paired with a high-performance power amplifier that delivers clean, consistent power. With a peak power output of 1,000 watts, the EON Sub G2 can easily fill large spaces, making it ideal for concerts, clubs, and other live sound applications.

Another highlight of the EON Sub G2 is its advanced onboard DSP (Digital Signal Processing) technology. This ensures optimal performance by providing precise control over sound characteristics, allowing users to tailor the audio output to suit different environments. The built-in crossover allows for seamless integration with any full-range loudspeakers, enabling a comprehensive sound system that delivers a full spectrum of audio.

Connectivity is also a significant advantage of the JBL EON Sub G2. It features multiple input options, including combo XLR/TRS inputs, which allow for versatile connectivity with various audio sources. The sub also has outputs for daisy-chaining additional speakers, making it easy to expand your sound system.

In terms of sound quality, the JBL EON Sub G2 excels with its remarkable transient response and low distortion levels, ensuring that every note and beat is heard with precision. The subwoofer’s frequency response ranges from 30Hz to 150Hz, capturing the intricate details of bass-heavy music genres.

In summary, the JBL EON Sub G2 is a powerful, portable subwoofer that offers exceptional sound quality and advanced features. Its combination of durability, advanced DSP technology, versatile connectivity options, and high output make it an excellent choice for any audio professional looking to enhance their performance setup. Whether for live events or studio use, the EON Sub G2 stands out as a top contender in the subwoofer market.