ViewSonic VS12946, VS12914 Troubleshooting, Wireless LAN, Bluetooth modules, Bluetooth device

Troubleshooting

Problem	Possible Cause - Solution
The Wireless LAN/	The modules are off. Check the LED indicator	/	to see if the
Bluetooth modules	module is on or off. If the LED indicator is off, then press the Fn + F11
cannot be detected.	(WLAN) or Fn + F12 (Bluetooth) in order to enable the modules.
The Bluetooth module	The Bluetooth module’s default state will be off after resuming from the
is off after resuming	Sleep power-saving state. Use the key combination (Fn + F12) to power
from Sleep.	on the Bluetooth module after the computer resumes from Sleep.
A file cannot be copied	Transferring data between the computer and a Bluetooth enabled
to/from a connected	device is supported in one direction only (simultaneous data
Bluetooth device.	transfer is not supported). If you are copying a file from your
	computer to a Bluetooth enabled device, you will not be able to copy a
	file from the Bluetooth enabled device to your computer until the file
	transfer process from the computer has been completed.
The captured video	Note that capturing high resolution video files requires a substantial
files from the PC	amount of disk space for each file.
Camera are taking up	Note that the Windows 7 system requires a minimum of 15GB of free
too much disk space.
	space on the C: drive system partition. It is recommended that you
	save the capture video file to a location other than the C:drive, limit the
	file size of the captured video or reduce video resolution (Options >
	Video Capture Pin... > Output Size).



Wireless Device

Operation Aboard

Aircraft

The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the wireless modules are OFF if you are using the computer aboard aircraft.

Use the key combinations

to toggle power to the

WLAN/Bluetooth

modules, and check the

LED indicator/visual indicator to see if the modules are powered on or not.

ViewSonic VNB130/VNB140 7