ViewSonic VX510 manual Installation of Wall Mount Optional

Page 6

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:

1Disconnect Power.

2Lay the LCD display face down on a towel or blanket.

3Remove the Plastic Covers from the back of the LCD display.

4Remove the five screws attaching the base.

5Remove the Rubber Plugs from inside the four VESA screw holes.

6Attach the mounting bracket from the VESA compatible wall-mounting kit (75 mm x 75 mm distance).

7Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

REAR PANEL

COVERS

PLASTIC

COVERS

FOUR

VESA

SCREW

HOLES

FIVE BASE SCREWS

ViewSonic VX510 5

Image 6

Contents VX510 LCD Display Contents For Your Records Product disposal at end of product lifePackage Contents PrecautionsGetting Started Insert the ViewSonic Wizard CD into the computer’s CD drive Quick InstallationTurn on LCD display and computer Wizard CDInstallation of Wall Mount Optional Using the LCD Display Setting the Timing ModeOSD and Power Lock Settings Adjusting the Screen Image Front Control Panel shown below in detailDo the following to adjust the screen image Following tips may help you optimize your displayMain Menu Controls Control ExplanationSrgb Manual Image Adjust displays the Manual Image Adjust menu Setup Menu displays the menu shown below Specifications Other InformationPower is on but no screen image TroubleshootingNo power Wrong or abnormal colorsCustomer Support Country Web site = Telephone RegionTo clean the case Cleaning the LCD DisplayTo clean the screen DisclaimerLimited Warranty Viewsonic LCD DisplayFor the United States and Canada Safety GuidelinesAppendix For European CountriesCompliance Information for U.S.A CE Conformity for EuropeViewSonic Corporation