Battery Replacement
Figure 1 Battery Installation
The battery should be replaced approximately every 2 years. This is accomplished as follows:
BATTERY
NORMAL/
•Unscrew the two screws that hold the battery access cover in place. It is located on the upper portion of the dividing network, on the rear of the speaker enclosure (Figure 1).
•Write today’s date, including the year, in this manual.
•Install the battery by aligning the battery terminals with the mating terminals in the network housing. Align male to female, female to male terminals, then snap the connectors together, assuring a tight connection.
•Replace the battery access cover and install screws.
Battery Replacement Record
Date Installed:
JBL INCORPORATED
8500 Balboa Blvd., Northridge, CA USA
High Frequency
Low Frequency
No.
7