
If there is an old password then setup will prompt with the following window instead and a current password will be required to be entered at first:
Set Supervisor Password |
|
|
Enter current password | [ | ] |
Enter New Password | [ | ] |
Confirm New Password | [ | ] |
|
|
|
User can type password in field of enter new password”, and
If verification OK:
Setup Notice
Changes have been saved.
[Continue]
The supervisor password is set complete after user press enter”
If verification fails:
Setup Warning
Password does not match
[Continue]
If password on boot is required, the password must be set otherwise it cannot be enabled.
The formats of the password are as follows:
Length | No more than 8 characters. |
Characters Alphanumeric keys only. The shift status i.e. Ctrl, Shift, Alt, and Capital are ignored.
ViewSonic VNB132 | 22 |