Stand Mounting and Precautions

•Keep the exterior of the speaker enclosure clean. Use a damp rag with a general-purpose household detergent. For grease and marking tape residue, use a damp cloth with isopropyl alcohol or mineral spirits and wipe dry. Do not use powerful solvents like acetone, MEK, lacquer thinner or 1,1,1-Trichloro-ethane (household cleaning fluid). These solvents will damage painted and co-polymer surfaces of your speakers.

•EON speakers are not intended for fixed installation in outdoor environments. Moisture can damage the speaker cone and surround, cause corrosion of electrical contacts, and create an electrical shock hazard. Protect your speakers from moisture. Avoid exposing the speakers to direct moisture. Any electrically powered device can produce dangerous shock hazards when wet or exposed to moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces will be degraded by long-term exposure to intense ultra-violet (UV) light.

•The EON Sub G2 contains no user serviceable parts. Refer servicing to an authorized JBL service agency.

Your EON speakers include a 35mm receptacle cup to facilitate mounting on tripod stands. When using stands, be sure to observe the following precautions:

•EON speakers include a thumb-screw that can be tightened to lock the speaker to the tripod stand. Before mounting the speaker on the stand, be sure to loosen the screw so that it doesn’t prevent the pole from fully penetrating the socket.

•Check the stand specification to be certain it is designed to support the weight of the speaker (see specifications). Observe all safety precautions specified by the stand manufacturer.

•Always verify that the stand is placed on a flat, level, and stable surface.

•Route cables so that performers, production crew, and audience will not trip over them and pull the speaker over.

•Be sure to fully extend the legs of tripod type stands.

•Position the stand so that the legs do not present a trip hazard.

•Do not attempt to place more than one speaker on a stand designed for a single speaker.

•Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e. sandbags) on the base of the stand to improve stability.

The EON Sub G2 generates considerable energy. When placed on a slippery surface such as polished wood or linoleum, the EON Sub G2 may move due to its acoustical energy output. Precautions should be taken to assure that the speaker does not fall off a stage or table on which it is placed. One solution is to place the speaker on a rubber mat.

Electrical Safety

All EON powered series speakers are fitted with a detachable power cord (supplied) which connects to the AC mains on the back panel of the loudspeaker. The power cord has an IEC female connector on one end and a male mains connector on the other end. This cord is supplied to accommodate the different worldwide safety and electrical code requirements. If the power cord supplied with your EON product has a 3-pin type plug do not cut off or damage the grounding plug. Like any electrical appliance, your EON powered speakers should not be used in water or when wet.

EON PowerSub G2 specifications

The JBL EON PowerSub G2 is a versatile and powerful subwoofer designed for both professional sound reinforcement and portable audio applications. This speaker is an integral part of JBL's renowned EON series, which has been widely recognized for its outstanding sound quality and innovative design. The EON PowerSub G2 is specifically engineered to deliver deep, impactful bass, making it an ideal choice for live performances, DJs, and various events.

One of the standout features of the JBL EON PowerSub G2 is its impressive power output. Equipped with a built-in Class D amplifier, the subwoofer boasts a peak power of 400 watts, ensuring that it can deliver robust bass even in large venues. The speaker’s efficient design not only maximizes power output but also minimizes the weight, making it highly portable and easy to transport.

The EON PowerSub G2 is designed with a 12-inch woofers that offer a frequency response range of 32 Hz to 130 Hz. This allows for an impressive low-end performance, providing the punch needed for everything from thumping dance tracks to acoustic performances. The construction of the woofer ensures that it can handle high sound pressure levels while maintaining clarity and precision in sound reproduction.

Another key characteristic of the EON PowerSub G2 is its user-friendly setup. It features an integrated pole mount for easy attachment to a variety of speaker stands, allowing for flexible positioning and optimized sound dispersion. The subwoofer also has multiple input options, including XLR, line-level inputs, and a built-in crossover, enabling seamless integration with other speakers and sound systems.

Durability is another hallmark of the JBL EON PowerSub G2. The rugged enclosure is designed to withstand the rigors of travel and performance, ensuring longevity and reliability in diverse environments. Additionally, the speaker is equipped with a protective grille that safeguards the woofer from accidental damage.

In summary, the JBL EON PowerSub G2 combines powerful performance, portability, and durability in a single package. With its Class D amplification, exceptional frequency response, and versatile setup options, it is an excellent choice for anyone seeking to enhance their audio experience, making it a favorite among musicians, venues, and audio professionals alike.