Lenovo 8159, 8215, 8157, 8158, 8156, 9210, 9211, 8116, TC A52-8155 manual Specifications

Page 21

Specifications

This section lists the physical specifications for your computer.

Dimensions

Width: 310 mm (12.2 in.)

Height: 87.5 mm (3.45 in.)

Depth: 358 mm (14.1 in.)

Weight

Minimum configuration as shipped: 7.3 kg (16 lbs)

Maximum configuration: 8.5 kg (18.7 lbs)

Environment

Air temperature:

Operating at 0 - 3000 ft (914.4 m): 10° to 35°C (50° to 95°F)

Operating at 3000 ft - 7000 ft (2134 m): 10° to 32°C (50° to 89.6°F)

Non-operating: 10° to 43°C (50° to 110°F)

Humidity:

Operating: 8% to 80%

Non-operating: 8% to 80%

Transit: 8% to 90%

Maximum altitude: 7000 ft (2133.6 m)

Electrical input

Input voltage:

Low range:

Minimum: 100 V ac

Maximum: 127 V ac

Input frequency range: 50/60 Hz

Voltage switch setting: 115 V ac

High range:

Minimum: 200 V ac

Maximum: 240V ac

Input frequency range: 50/60 Hz

Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.09 kVA

Maximum configuration: 0.19-0.34 kVA

Note: The actual maximum configuration value may vary depending on the microprocessor, configuration, and software.

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 256 Btu/hr (75 watts)

Maximum configuration: 904 Btu/hr (265 watts)

Airflow

Approximately 16 cubic feet (0.45 cubic meters) per minute

Acoustical noise-emission values

Note: In this computer, fan speed is controlled by temperature, configuration, and software. Actual noise-emission values might be different from the stated values depending on the number of fans and the speed of the fans.

Average sound-pressure levels:

At operator position (0.5 meters):

Idle: 29 dBA

Operating: 34 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 26 dBA

Operating: 29 dBA

Declared (upper limit) sound-power levels:

Idle: 4.0 bels

Operating: 4.3 bels

Note: These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

Chapter 1. Installing options 5

Image 21
Contents Page Page Page Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesExtension cords and related devices Power cords and power adaptersBatteries Plugs and outletsHeat and product ventilation CD and DVD drive safetyAdditional safety information Lithium battery noticeTo connect To disconnect Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing options Memory Expansion Available options Specifications Supported operating positions Tools requiredHandling static-sensitive devices Installing external options Locating connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Locating components Accessing system board components and drives Identifying parts on the system board Installing memory What to do next Installing PCI adaptersInstalling internal drives Drive specifications Installing a drive in bay Installing a diskette drive in bay User Guide Connecting drives Security features Connecting an additional serial ATA hard disk driveChanging the battery Integrated cable lock Password protectionErasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsUser Password Password considerationsAdministrator Password IDE Drive User PasswordIDE Drive Master Password Setting, changing, and deleting a passwordResetting the hard disk drive and power-on password Selecting a startup device Using Security Profile by DeviceSelecting a temporary startup device Changing the startup device sequenceExiting from the Setup Utility program Advanced settingsUser Guide Updating flashing Bios from a diskette or CD-ROM Appendix A. Updating system programsSystem program Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemAppendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Password lost or forgotten Page Part Number 39J8170